LDK Carbon Steel Rod End, 6.35mm Bore Size, 42.85mm Long , 1/4 in Thread Size, UNF Thread Standard Female

  • RS-stocknr. 185-2553
  • Fabrikantnummer PHSB4
  • Fabrikant LDK
Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: CN
Productomschrijving

Ball: AISI 52100 bearing Steel, heat treated, HRC56 min, Precision ground polished hard chromium plated
Body: Carbon steel,clear Zinc plated.
Race: Brass
Sliding contact surfaces: Steel/Brass

Specificaties
Kenmerk Waarde
Bore Size 6.35mm
Dynamic Load Rating 4.8kN
Static Load Rating 11.2kN
Overall Length 42.85mm
Material Carbon Steel
Connection Thread Size 1/4 in
Connection Thread Standard UNF
Connection Gender Female
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
12,32
(excl. BTW)
14,91
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
12,32 €
5 - 9
11,80 €
10 +
11,60 €
Related Products
Mechanical linkages manufactured from C22/C35 Pb steel, zinc ...
Description:
Mechanical linkages manufactured from C22/C35 Pb steel, zinc plated and passivatedHardened ball, ground and polished 100 cr6 ball bearing steelInserts are Cu Zn 40 Mn Pb bronze; these bearings require lubrication and are factory filled with Molykate BR2+/- 13° off-centre ...
Mechanical linkages manufactured from C22/C35 Pb steel, zinc ...
Description:
Mechanical linkages manufactured from C22/C35 Pb steel, zinc plated and passivatedHardened ball, ground and polished 100 cr6 ball bearing steelInserts are Cu Zn 40 Mn Pb bronze; these bearings require lubrication and are factory filled with Molykate BR2+/- 13° off-centre ...
Premium Line Rod Ends low maintenance, lubrication possible ...
Description:
Premium Line Rod Ends low maintenance, lubrication possible rod ends with integral self-aligning roller or ball bearing. Rod end housing: forged steel, tempered, case hardened bearing race, ground and lapped, surface galvanizedInner ring: ball bearing steel, hardened, superfine groundLubrication: Polyrex ...
Premium Line Rod Ends low maintenance, lubrication possible ...
Description:
Premium Line Rod Ends low maintenance, lubrication possible rod ends with integral self-aligning roller or ball bearing. Rod end housing: forged steel, tempered, case hardened bearing race, ground and lapped, surface galvanizedInner ring: ball bearing steel, hardened, superfine groundLubrication: Polyrex ...