LDK Carbon Steel Rod End, 4.82mm Bore Size, 34.91mm Long , 10 mm Thread Size, UNF Thread Standard Female

  • RS-stocknr. 185-2552
  • Fabrikantnummer PHSB3
  • Fabrikant LDK
Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: CN
Productomschrijving

Ball: AISI 52100 bearing Steel, heat treated, HRC56 min, Precision ground polished hard chromium plated
Body: Carbon steel,clear Zinc plated.
Race: Brass
Sliding contact surfaces: Steel/Brass

Specificaties
Kenmerk Waarde
Bore Size 4.82mm
Dynamic Load Rating 2.8kN
Static Load Rating 7.4kN
Overall Length 34.91mm
Material Carbon Steel
Connection Thread Size 10 mm
Connection Thread Standard UNF
Connection Gender Female
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
11,49
(excl. BTW)
13,90
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
11,49 €
5 - 9
10,97 €
10 +
10,77 €
Related Products
Mechanical linkages manufactured from C22/C35 Pb steel, zinc ...
Description:
Mechanical linkages manufactured from C22/C35 Pb steel, zinc plated and passivatedHardened ball, ground and polished 100 cr6 ball bearing steelInserts are Cu Zn 40 Mn Pb bronze; these bearings require lubrication and are factory filled with Molykate BR2+/- 13° off-centre ...
Premium Line Rod Ends low maintenance, lubrication possible ...
Description:
Premium Line Rod Ends low maintenance, lubrication possible rod ends with integral self-aligning roller or ball bearing. Rod end housing: forged steel, tempered, case hardened bearing race, ground and lapped, surface galvanizedInner ring: ball bearing steel, hardened, superfine groundLubrication: Polyrex ...
Rod Ends with female thread and PTFE liner. ...
Description:
Rod Ends with female thread and PTFE liner. For use at high dynamic pressure and tension loads in corrosive environments.
Body - Alloy Steel, heat treated, protective coated ...
Description:
Body - Alloy Steel, heat treated, protective coated for corrosion resistance.Ball - Alloy steel, heat treated, hard chrome plated.Race - Alloy steel, heat treated, protective coated for corrosion resistance (Low carbon steel with PTFE liners). Units are supplied without grease ...