Durbal M12 x 1.75 Female Rod End, 12mm Bore Size, 66mm Long , M12 Thread Size, Metric Thread Standard Female

  • RS-stocknr. 185-0082
  • Fabrikantnummer BRTF 12-00-501
  • Fabrikant Durbal
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Premium Line Rod Ends low maintenance, lubrication possible rod ends with integral self-aligning roller or ball bearing.

Female thread greasable, low maintenance, shields adapter.

Rod end housing: forged steel, tempered, case hardened, bearing race, ground and lapped, rolled thread, surface galvanizedInner ring: ball bearing steel, hardened, superfine groundLubrication: Polyrex EP2 or soap complexTemperature range -20 °C to +120 °CBearing clearance: 15 - 30 μm radial

Specificaties
Kenmerk Waarde
Connection Size M12 x 1.75 Female
Bore Size 12mm
Dynamic Load Rating 10.3kN
Static Load Rating 6.6kN
Overall Length 66mm
Material Forged Steel
Connection Thread Size M12
Connection Thread Standard Metric
Maximum Operating Temperature +120°C
Minimum Operating Temperature -20°C
Connection Gender Female
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
166,74
(excl. BTW)
201,76
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
166,74 €
5 +
160,01 €
Related Products
Rod Ends with female threads regreasable through the ...
Description:
Rod Ends with female threads regreasable through the housing with flush type grease fitting.
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, ...
Description:
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: BrassSliding contact surfaces: Steel/Brass.
Ball: 440C Stainless Steel, heat treated, HRC56 min ...
Description:
Ball: 440C Stainless Steel, heat treated, HRC56 min Precision ground, polishedBody: 304 Stainless steelRace: PTFE compositeSliding contact surfaces: Steel/PTFE composite.
The following accessories are available for the CETOP ...
Description:
The following accessories are available for the CETOP Roundline pneumatic actuator range. Corrosion-resistant galvanised Zinc coating.