Durbal M20 x 1.5 Male Rod End, 20mm Bore Size, 103mm Long , M20 Thread Size, Metric Thread Standard Male

  • RS-stocknr. 185-0077
  • Fabrikantnummer BRTM 20-00-502
  • Fabrikant Durbal
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Premium Line Rod Ends low maintenance, lubrication possible rod ends with integral self-aligning roller or ball bearing.

Male thread greasable, low maintenance, shields adapter.

Rod end housing: forged steel, tempered, case hardened, bearing race, ground and lapped, rolled thread, surface galvanizedInner ring: ball bearing steel, hardened, superfine groundLubrication: Polyrex EP2 or soap complextemperature range -20 °C to +120 °CBearing clearance: 15 - 30 μm radial

Specificaties
Kenmerk Waarde
Connection Size M20 x 1.5 Male
Bore Size 20mm
Dynamic Load Rating 17kN
Static Load Rating 11.7kN
Overall Length 103mm
Material Forged Steel
Connection Thread Size M20
Connection Thread Standard Metric
Maximum Operating Temperature +120°C
Minimum Operating Temperature -20°C
Connection Gender Male
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 22/10/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
287,94
(excl. BTW)
348,41
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
287,94 €
5 +
276,45 €
Related Products
Plastic right angle ball and socket joint with ...
Description:
Plastic right angle ball and socket joint with metal stud High load capacity and low weight Maintenance-free operationTemperature range: -30°C to +80°C.
Mechanical linkages manufactured from C22/C35 Pb steel, zinc ...
Description:
Mechanical linkages manufactured from C22/C35 Pb steel, zinc plated and passivatedHardened ball, ground and polished 100 cr6 ball bearing steelInserts are Cu Zn 40 Mn Pb bronze; these bearings require lubrication and are factory filled with Molykate BR2+/- 13° off-centre ...
Rod Ends with male thread and PTFE liner. ...
Description:
Rod Ends with male thread and PTFE liner. For use at high dynamic pressure and tension loads in corrosive environments.
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, ...
Description:
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: BrassSliding contact surfaces: Steel/Brass.