RS PRO M5 x 0.8 Female Steel Rod End, 5mm Bore Size, 35mm Long , M5 x 0.8 Thread Size, Metric Thread Standard Female

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CH
Productomschrijving

Rod End Miniature - Female

Mechanical linkages manufactured from C22/C35 Pb steel, zinc plated and passivated
Hardened ball, ground and polished 100 cr6 ball bearing steel
Inserts are Cu Zn 40 Mn Pb bronze; these bearings require lubrication and are factory filled with Molykate BR2
+/- 13° off-centre movement through 360°

Specificaties
Kenmerk Waarde
Connection Size M5 x 0.8 Female
Bore Size 5mm
Static Load Rating 5600N
Overall Length 35mm
Material Steel
Connection Thread Size M5 x 0.8
Connection Thread Standard Metric
Connection Gender Female
6 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
18,15
(excl. BTW)
21,96
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
18,15 €
5 - 9
17,60 €
10 +
17,02 €
Related Products
Rod Ends with female thread and PTFE liner. ...
Description:
Rod Ends with female thread and PTFE liner. For use at high dynamic pressure and tension loads in corrosive environments.
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, ...
Description:
Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: PTFE compositeSliding contact surfaces: Steel/PTFE composite.
Ball: AISI 52100 bearing Steel, heat treated, HRC56 ...
Description:
Ball: AISI 52100 bearing Steel, heat treated, HRC56 min, Precision ground polished hard chromium plated Body: Carbon steel,clear Zinc plated. Race: BrassSliding contact surfaces: Steel/Brass.
Body - Alloy Steel, heat treated, protective coated ...
Description:
Body - Alloy Steel, heat treated, protective coated for corrosion resistance.Ball - Alloy steel, heat treated, hard chrome plated.Race - Alloy steel, heat treated, protective coated for corrosion resistance (Low carbon steel with PTFE liners). Units are supplied without grease ...