Marquardt Illuminated DPNO Rocker Switch Panel Mount

  • RS-stocknr. 907-7065
  • Fabrikantnummer 1935.3218
  • Fabrikant Marquardt
Wetgeving en conformiteit
Land van herkomst: TN

Marquardt 1930 Series Rocker Switches (Waterproof IP65)

From Marquardt, an extensive range IP65 of double pole rocker switches designed for panel mounting. With a choice of illuminated and non-illuminated actuators in various legend designs and colours, the 1930 series of sealed rocker switches are suitable for a wide variety of applications. Fitting is easy, once the recommended panel cut-out is made, the robust rocker switches Snap-in to the panel and is held in place by the retention ribs ensuring a tight fit. The 1930 series of waterproof rocker switches are available with momentary or latching formats including 2 and 3 position switching, On-Off, centre off and change over. The fully sealed IP65 rocker switches are ideal for maintenance and repair in harsh environments including Class II appliances.

Features and Benefits

• AC mains rated
• High current rating, up to 20A
• High inrush current (capacitive) up to 120A, stock number 741-0836 up to 100A
• Moulded black housing
• Modern rocker design
• Rated to UL 94 V-2
• Industry standard cut-out
• IP65 with an integral sealing gasket for extra protection
• Connection via 6.3 mm quick connect male tab terminals
• DPNO, DPST and DPDT switching configurations
• On-Off and On-Off-On switching operation

Applications for rocker switches

Rocker switches are one of the most frequently used types of electrical switch used in the market today. Due to their simple design and easy operation rocker switches are utilised in both domestic and industrial applications. Some of the most common are:

• Security equipment
• Automation and control panels
• Test instruments
• Laboratory equipment
• Power supplies
• HVAC equipment

• Are the rocker switches easy to connect?
Yes, the 1930 series of switches are fitted with 6.3 mm quick connect male tab terminals. Simply select the appropriate red, yellow or blue female push on receptacles, according to the wire size required.


The current rating and life expectancy figures quoted are nominal, please see datasheet for further ratings.



Marquardt Rocker Switches

Kenmerk Waarde
Contact Configuration DPNO
Switch Operation On-None-Off
Panel Cut Out Width 30mm
Panel Cut Out Height 22mm
Contact Current Rating 16 A
Illuminated Yes
Actuator Colour Green
Mounting Type Panel Mount
IP Rating IP65
Terminal Type Quick Connect
Actuator Shape Rectangular
Minimum Operating Temperature -30 (Actuating Side) °C, -30 (Terminal Side) °C
Contact Resistance <100mΩ
Contact Material Silver
Panel Cut Out Size 30.2 x 22mm
Maximum Operating Temperature +55 (Actuating Side) °C, +105 (Terminal Side) °C
AC Voltage Rating 250V
Mechanical Life 50000Operations
Case Material Polyamide
Operating Temperature Range -30 → +105 (Terminal Side) °C, -30 → +55 (Actuating Side) °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 16/06/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
7,00 €
25 - 49
6,65 €
50 - 99
6,23 €
100 +
5,74 €
Related Products
Shot moulded actuators with red or green sections, ...
Shot moulded actuators with red or green sections, which become visible in the ON positionSPST silver-cadmium oxide contacts Connection via .250in push-on receptaclesRetention barb design enables the switches to fit a range of cut-outsPolyester/Nylon actuator, Nylon caseIdeal where illuminated switches ...
IP68 rating if used without panel assembly systemThese ...
IP68 rating if used without panel assembly systemThese switches are terminated with 6.35mm fast-on terminals and are supplied with a panel-sealing gasket Illuminated versions are available with a choice of 250V neon or red or green LEDs with integral resistors ...
The CW Switches are low cost molder rockers. ...
The CW Switches are low cost molder rockers. These rockers solder lug / quick connect terminals can be used with solder lug / quick connect terminals. Snap acting contact mechanismHighly reliableContact construction stationary and stableFront panel snap in mounting.
C&K offers more rotary switches for PCB or ...
C&K offers more rotary switches for PCB or panel-mount applications. Miniature and subminiature designs save space on PCBs, while solder lug, PC thru-hole, wire lead, or quick connect terminations support a variety of mount options. AutomotiveMajor and small appliancesIndustrial equipment ...