Electromagnet

  • RS-stocknr. 194-6691
  • Fabrikantnummer Electromagnet
  • Fabrikant Niryo
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: FR
Productomschrijving

Electromagnet Gripper

With this tool Niryo One can easily pick and place very small metallic pieces (multiple ones can be picked at the same time), which is very hard with any gripper, because grasping such pieces is not practical.

Niryo One is a 6-axis open source collaborative robot manufactured in France. Affordable and easy to use, it has been designed for higher education, vocational training and R&D laboratories. This industrial type robotic arm is based on ROS, Arduino and Raspberry Pi, and allows programming with Scratch (Blockly), Python, C++, Matlab, Modbus TCP/IP, TCP ASCII Server.

Specificaties
Kenmerk Waarde
Gripper Type Electric
Number of Fingers 1
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
69,00
(excl. BTW)
83,49
(incl. BTW)
Aantal stuks
Per stuk
1 +
69,00 €
Related Products
The E1 gripper for the R12 robot arm ...
Description:
The E1 gripper for the R12 robot arm is an electric gripper which uses a DC motor and leadscrew to drive the gripper fingers. The gripper includes stylised fingers with high friction rubber tips enabling it to manipulate items that ...
The EG17 for the R17 robot is a ...
Description:
The EG17 for the R17 robot is a high precision DC powered linear parallel gripper with a large reach and tapped holes enabling customisation.The parallel gripper works by sliding the two jaws together in the form of a parallel gripping ...
The TC12 tool Changer has been exclusively designed ...
Description:
The TC12 tool Changer has been exclusively designed for the ST Robotics R12 robot and does not require an external power source to operate. It comprises of two parts, the robot side and the tool side. • Spring loaded design• ...
The PG17 pneumatic gripper designed for the R17 ...
Description:
The PG17 pneumatic gripper designed for the R17 robot arm uses linear slides which enable high accuracy and repeatability. The basic option comprises of a pneumatic circuit and one gripper with 4 tapped holes for extra mounts enabling the fitting ...