Vaccum Pump

  • RS-stocknr. 194-6690
  • Fabrikantnummer Vaccum Pump
  • Fabrikant Niryo
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: FR
Productomschrijving

Niryo One Vacuum Pump

A vacuum pump is very efficient for fast and reliable pick and place, and allows you to pick some objects that a normal gripper can’t pick. Ex : take out the cover of a flat box, move soda cans from the top, pick and place large objects with a flat surface.
Most vacuum pumps are making so much noise, you just can’t stand and work near the robot, it is too disturbing. The pump we’ve developed is different : it’s operating silently, with the same efficiency as a vacuum pump, for the same price. A servomotor actuates a syringe which pumps the air out.

Niryo One is a 6-axis open source collaborative robot manufactured in France. Affordable and easy to use, it has been designed for higher education, vocational training and R&D laboratories. This industrial type robotic arm is based on ROS, Arduino and Raspberry Pi, and allows programming with Scratch (Blockly), Python, C++, Matlab, Modbus TCP/IP, TCP ASCII Server.

Specificaties
Kenmerk Waarde
Gripper Type Vacuum
End Effector Suction Cup
Number of Fingers 1
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
99,00
(excl. BTW)
119,79
(incl. BTW)
Aantal stuks
Per stuk
1 +
99,00 €
Related Products
Professional vacuum extractor for removing engine oils from ...
Description:
Professional vacuum extractor for removing engine oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. It utilises a manual pump to create the vacuum enabling the oil to be removed via the dipstick tube. Also suitable for low ...
Adjustment of the metering rate directly in l/h ...
Description:
Adjustment of the metering rate directly in l/h or gphSimple tube changeNo problems with very gaseous media or air locksSuitable for viscosities of up to 10,000 mPasSole contact with media in the tubeMany different control options, such as using an ...
The E1 gripper for the R12 robot arm ...
Description:
The E1 gripper for the R12 robot arm is an electric gripper which uses a DC motor and leadscrew to drive the gripper fingers. The gripper includes stylised fingers with high friction rubber tips enabling it to manipulate items that ...
The EG17 for the R17 robot is a ...
Description:
The EG17 for the R17 robot is a high precision DC powered linear parallel gripper with a large reach and tapped holes enabling customisation.The parallel gripper works by sliding the two jaws together in the form of a parallel gripping ...