Igus Adapter Robot Gripper

  • RS-stocknr. 126-8971
  • Fabrikantnummer RL-DC-20-GRI-90-01-05
  • Fabrikant Igus
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Igus Gripper Adapters

These gripper adapters from Igus are made from folded sheet-metal and are available in two sizes. They can be screwed onto the last axis of the articulated arm with just a few screws. SLS adapter plates can be used to adapt different grippers (pneumatic, electric, magnetic), suction cups or other actuators.

Features and Benefits

• Modular
• Flexible

Product Application Information

Typical application areas include low-cost robotics.

Igus RobolinkD

Specificaties
Kenmerk Waarde
End Effector Adapter
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 21/04/2020, met een levertijd van 2 à 3 werkdagen.
Prijs 1 Box of 1
222,01
(excl. BTW)
268,63
(incl. BTW)
Box(es)
1 +
222,01 €
Related Products
The E1 gripper for the R12 robot arm ...
Description:
The E1 gripper for the R12 robot arm is an electric gripper which uses a DC motor and leadscrew to drive the gripper fingers. The gripper includes stylised fingers with high friction rubber tips enabling it to manipulate items that ...
The EG17 for the R17 robot is a ...
Description:
The EG17 for the R17 robot is a high precision DC powered linear parallel gripper with a large reach and tapped holes enabling customisation.The parallel gripper works by sliding the two jaws together in the form of a parallel gripping ...
The TC12 tool Changer has been exclusively designed ...
Description:
The TC12 tool Changer has been exclusively designed for the ST Robotics R12 robot and does not require an external power source to operate. It comprises of two parts, the robot side and the tool side. • Spring loaded design• ...
The PG17 pneumatic gripper designed for the R17 ...
Description:
The PG17 pneumatic gripper designed for the R17 robot arm uses linear slides which enable high accuracy and repeatability. The basic option comprises of a pneumatic circuit and one gripper with 4 tapped holes for extra mounts enabling the fitting ...