RS PRO Jaw to Jaw Stainless Steel Rigging Screw, M5 Thread
- RS-stocknr.:
- 183-5942
- Fabrikant:
- RS PRO
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
51 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 38,91
(excl. BTW)
€ 47,08
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 38,91 |
- RS-stocknr.:
- 183-5942
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- DE
Productomschrijving
RS PRO Rigging Screw, Jaw to Jaw, M5
Need a way to fasten rigging safely? The RS PRO rigging screw is the tool for the job. It's made from robust stainless steel and has jaw fittings on either end, providing safe and secure connection points for ropes held at tension.
Each jaw has a locking pin to hold it firmly in place. The rotating body of the screw allows you to either pull the ends towards one another or push them apart, so you can loosen or tighten the rope the rigging screw is connected to. When fully open the screw is 190 mm long and it contracts to 130 mm when closed. It has an M5 thread size and spacious eye diameter of 5 mm.
These components come in useful in any application where you need to hold ropes at a certain tension. They're commonly used in boat rigging and the cables of suspension bridges.
Each jaw has a locking pin to hold it firmly in place. The rotating body of the screw allows you to either pull the ends towards one another or push them apart, so you can loosen or tighten the rope the rigging screw is connected to. When fully open the screw is 190 mm long and it contracts to 130 mm when closed. It has an M5 thread size and spacious eye diameter of 5 mm.
These components come in useful in any application where you need to hold ropes at a certain tension. They're commonly used in boat rigging and the cables of suspension bridges.
Features and Benefits
• Jaw-to-jaw stainless-steel rigging screw
• Electro-polished finish
• End A jaw fitting
• End B jaw fitting
• Closed length of 130 mm
• Open length of 190 mm
• Eye diameter of 5 mm
• Thread size of M5
• Electro-polished finish
• End A jaw fitting
• End B jaw fitting
• Closed length of 130 mm
• Open length of 190 mm
• Eye diameter of 5 mm
• Thread size of M5
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
This is not for lifting applications.
Specificaties
Kenmerk | Waarde |
|---|---|
| Material | Stainless Steel |
| Finish | Electro Polished |
| End Fittings | Jaw to Jaw |
| Thread Size | M5 |
| Weight | 900g |
| Eye Diameter | 5mm |
| Closed Length | 130mm |
| End A Fitting | Jaw |
| End B Fitting | Jaw |
| Open Length | 190mm |