ON Semiconductor, N24RF16DTPT3G

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TH
Productomschrijving

Contactless Transmission of Data
Vicinity Range Communication (up to 150 cm)
Air Interface Communication at 13.56 MHz (HF)
To tag: ASK Modulation with 1.65 Kbit/s or 26.48 Kbit/s Data Rate
From Tag: Load Modulation Using Manchester Coding with 423 kHz and 484 kHz Subcarriers in Low (6.6 Kbit/s) or high (26 Kbit/s) Data Rate Mode. Supports the 53 Kbit/s Data Rate with Fast Commands
Read & Write 32−bit Block Mode
Anti−collision Support
64−bit Unique Identifier (UID)
Multiple 32−bit Passwords and Lock Feature for Each User Memory Sector
Supports Fast (400 kHz) and Fast−Plus (1 MHz) I2C Protocol
1.8 V to 5.5 V Supply Voltage Range
4−Byte Page Write Buffer
I2C Timeout
Schmitt Triggers and Noise Suppression Filters on I2C Bus Inputs (SCL and SDA)
512 Blocks x 32 Bits (16 Sectors of 32 Blocks Each): RF Mode
2048 x 8 Bits I2C Mode
2,000,000 Program/Erase Cycles
200 Year Data Retention
−40C to +105C Temperature Range
SOIC, TSSOP 8−lead Packages
These Devices are Pb−Free, Halogen Free/BFR Free
Applications
NFC Tag
RF Tag
EEPROM

Specificaties
Kenmerk Waarde
Component Type Transponder
Supported Bus Interfaces I2C
Supply Voltage 1.8 → 5.5V
Dimensions 3.1 x 4.5 x 1.05mm
Height 1.05mm
Length 3.1mm
Maximum Operating Temperature +105°C
Minimum Operating Temperature -40°C
Width 4.5mm
3000 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (On a Reel of 3000)
1,022
(excl. BTW)
1,237
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3000 +
1,022 €
3.066,00 €
*prijsindicatie
Related Products
The RWD-QT-LP-SMT is a surface mount (SMT) package ...
Description:
The RWD-QT-LP-SMT is a surface mount (SMT) package option suitable for modern printed circuit boards. Supports HitagS256, HitagS2048, Hitag1, Hitag2 and EM4XXX transponders at 125 KHz. To be used with baseboard RWD-QT-SMT for evaluation and development.
Description:
The USB-B1 v2 is a low cost full RFID/NFC read/write device with USB interface that can operate in "host" connected mode or "stand alone" mode. Supports Mifare Classic 1k & 4k, NTAG2xx and Ultralight. Additionally, you can read serial numbers ...
The TRH031M device is a highly-integrated multi-protocol reader ...
Description:
The TRH031M device is a highly-integrated multi-protocol reader for contactless communication. RF Operating Frequency: 13.56MHzProximity operating distance: up to 100mmAutomatic external Interface type detectionAutomatic and flexible interrupt handling64-byte Tx/Rx FIFO bufferHost communication: SPI, parallelBit- ...
Description:
The RFID C1 UART is a very powerful, wireless and low cost full RFID/NFC read/write device with UART interface that can operate in both host connected and stand alone mode. Supports MIFARE® Classic® in 1K, 4K memory, ICODE, MIFARE Ultralight®, ...