RS PRO 75Ω Straight BNC RF Terminator, 0 → 1GHz, 0.5W Average Power Rating

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

RS 75 Ohm BNC RF Coaxial Plug Terminators

75 Ohm BNC RF coaxial plug terminator with bayonet fitting, nickel plated body and gold plated centre contact. This 75 Ohm RF coax cable mount plug terminator has a 0.5 W average power rating and a frequency of 1 GHz.

RS BNC Connectors

RS BNC connectors are suitable for a variety of applications including video signalling and test equipment.

Specificaties
Kenmerk Waarde
Interface Type BNC
Gender Male
Body Orientation Straight
Impedance 75Ω
Body Plating Nickel
Operating Frequency 0 → 1GHz
Average Power Rating 0.5W
Contact Material Brass
Contact Plating Gold
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1833 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
4,18
(excl. BTW)
5,06
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
4,18 €
25 - 99
3,75 €
100 - 249
3,51 €
250 - 499
3,30 €
500 +
3,10 €
Related Products
RF coaxial 50 ohm and 75 ohm BNC ...
Description:
RF coaxial 50 ohm and 75 ohm BNC 'T' adapters with a nickel plated body, delrin insulator and gold plated centre contact.Stock numbers 700-9499 and 700-9509 have a jack-jack-jack configuration and a brass body.Stock numbers 700-9502 and 700-9506 have a ...
BNC loads to absorb cable end signals on ...
Description:
BNC loads to absorb cable end signals on Ethernet buses or backbones. 1 W load.Fitted with a 25 cm chain with an end ring terminal.
50 Ohm N series RF coaxial male termination ...
Description:
50 Ohm N series RF coaxial male termination connectors with a nickel plated brass body, gold plated centre contact and PTFE dielectric. These N series male RF coax terminators have the following ratings:Stock number 263-2750: DC 4 GHz, 1WStock number ...
50 Ohm BNC Plug Termination connector with a ...
Description:
50 Ohm BNC Plug Termination connector with a PTFE dielectric, straight silver plated brass body and silver plated contact. This 50 Ohm BNC Plug Termination has a resistor specification of 0.5 W.