TE Connectivity 50Ω Straight BNC RF Terminator, 0 → 1GHz, 0.5W Average Power Rating

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

TE Connectivity 50 Ohm BNC Connector - Plug Termination

50 Ohm BNC Plug Termination connector with a PTFE dielectric, straight silver plated brass body and silver plated contact. This 50 Ohm BNC Plug Termination has a resistor specification of 0.5 W

Approvals

7777

TE Connectivity BNC RF Coaxial Connectors

Specificaties
Kenmerk Waarde
Interface Type BNC
Gender Male
Body Orientation Straight
Impedance 50Ω
Body Plating Silver
Operating Frequency 0 → 1GHz
Average Power Rating 0.5W
Contact Material Brass (Center Contact)
Contact Plating Silver (Center Contact)
1000 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Box of 1000)
2,697
(excl. BTW)
3,263
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
1000 +
2,697 €
2.697,00 €
*prijsindicatie
Related Products
75 Ohm BNC RF coaxial bulkhead jack to ...
Description:
75 Ohm BNC RF coaxial bulkhead jack to jack coupler with bayonet fixings. This 75 Ohm BNC straight RF coax bulkhead jack to jack coupler has a nickel plated body, nuts ands washers and a gold plated centre contact.
A range of 50 Ohm BNC RF coaxial ...
Description:
A range of 50 Ohm BNC RF coaxial adapters with bayonet couplings, nickel plated body and gold plated centre contact. Stock number 546-4926 is an RF coax BNC adapter with a BNC socket to BNC socket (f-f) configurationStock number 546-4932 ...
RF coaxial 50 ohm and 75 ohm BNC ...
Description:
RF coaxial 50 ohm and 75 ohm BNC 'T' adapters with a nickel plated body, delrin insulator and gold plated centre contact.Stock numbers 700-9499 and 700-9509 have a jack-jack-jack configuration and a brass body.Stock numbers 700-9502 and 700-9506 have a ...
BNC loads to absorb cable end signals on ...
Description:
BNC loads to absorb cable end signals on Ethernet buses or backbones. 1 W load.Fitted with a 25 cm chain with an end ring terminal.