IMS Right Angle RF Terminator, PCB Mount

  • RS-stocknr. 112-3665
  • Fabrikantnummer 80.5420.017
  • Fabrikant IMS
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: HU
Productomschrijving

IMS BNC Connectors

Allows you to solder directly onto PCBs
Straight and angled designs
With 2 or 4 solder connections
The optimum solution for your requirements
Made from nickel-plated brass
With tin-plated connection pins

IMS BNC Connectors

Specificaties
Kenmerk Waarde
Body Orientation Right Angle
Mounting Type PCB Mount
155 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
5,73
(excl. BTW)
6,93
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
5,73 €
15 - 49
5,25 €
50 - 99
4,92 €
100 - 249
4,69 €
250 +
4,51 €
Related Products
The TA271 D9-BNC adaptor lets you use traditional ...
Description:
The TA271 D9-BNC adaptor lets you use traditional differential voltage probes and current probes, and make single-ended measurements with a ground-referenced probe. It is also essential when using the TA325 and TA326 current probes. The adaptor grounds the negative input ...
1·6/5·6 series designed specifically for instrumentation within telecommunication ...
Description:
1·6/5·6 series designed specifically for instrumentation within telecommunication systemsFully meets IEC 169-13 (DIN 47295)Screw coupling types give reliability in performancePCB sockets availableSocket to socket adaptor also available.
UHF Series is an inexpensive universal plug connector ...
Description:
UHF Series is an inexpensive universal plug connector with screw lock. The toothing engages to prevent it from twisting even when exposed to vibration. Its wave impedance has not been adapted and its area of application is limited to lower ...
A series of connectors to MIL specifications with ...
Description:
A series of connectors to MIL specifications with high quality materials and PTFE insulation. Non-constant impedance design, suitable for use up to 500V peak and 200MHz, or up to 500MHz with diminished performance. These coaxial connectors are designed for use ...