Huber & Suhner 50Ω Straight N Yes RF Terminator, 0 → 4GHz, 1W Average Power Rating

  • RS-stocknr. 494-795
  • Fabrikantnummer 65_N-50-0-1/133_NE
  • Fabrikant Huber & Suhner
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CH
Productomschrijving

Terminations

N-Series Standard Termination
Broadband operationability
Connectors meet the relevant IEC / MIL / CECC interface standards
High repeatability

N Series Huber+Suhner

Specificaties
Kenmerk Waarde
Interface Type N
Gender Male
Body Orientation Straight
Impedance 50Ω
Body Plating White Bronze
Operating Frequency 0 → 4GHz
Average Power Rating 1W
Low Power Yes
Contact Material Brass
Contact Plating Gold over Nickel
3 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
45,52
(excl. BTW)
55,08
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
45,52 €
10 - 24
40,96 €
25 - 49
37,55 €
50 - 99
34,14 €
100 +
31,87 €
Related Products
From Telegärtner, this selection of RF adaptors is ...
Description:
From Telegärtner, this selection of RF adaptors is suitable for inter-series connection of RF coaxial connectors. Robust and compact, these RF coaxial adaptors are well suited to audio visual and laboratory applications.
Sub-miniature connectors to MIL-C-39012 with snap-on coupling for ...
Description:
Sub-miniature connectors to MIL-C-39012 with snap-on coupling for a reliable and quick/disconnect system. Both clamp and crimp termination versions available. Series of connectors designed for all types of SMB-SMB adaptations.Push-pull coupling system.Identical technical specifications to the female cable gland ...
50 Ohm ZDC/BNC RF coaxial adapter with a ...
Description:
50 Ohm ZDC/BNC RF coaxial adapter with a jack-jack (f-f) configuration and bayonet fitting. This 50 Ohm RF coax BNC jack to BNC jack adapter has a nickel plated zinc body and gold plated male centre contact.
Brass-bodied connectors with PTFE insulators and beryllium copper ...
Description:
Brass-bodied connectors with PTFE insulators and beryllium copper female contacts. Available in crimp or clamp options. For information regarding appropriate crimp tooling please refer to the Connector/Cable/Tooling Compatability table at the beginning of this section. Cut-outs are illustrated for respective ...