RF SPDT Switch 6GHz 30dB ESD TSNP6

  • RS-stocknr. 171-1926
  • Fabrikantnummer BGS12SN6E6327XTSA1
  • Fabrikant Infineon
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The BGS12SN6 RF MOS switch is specifically designed for WLAN and Bluetooth applications. Any of the 2 ports can be used as termination of the diversity antenna handling up to 30 dBm. This single supply chip integrates on-chip CMOS logic driven by a simple, single-pin CMOS or TTL compatible control input signal. The 0.1 dB compression point exceeds the switch’s maximum input power level, resulting in linear performance at all signal levels. The RF switch has a very low insertion loss of 0.25 dB in the 1 GHz and 0.29 dB in the 2.5 GHz range. Unlike GaAs technology, external DC blocking capacitors at the RF ports are only required if DC voltage is applied externally.

Up to 6GHz frequency range
Very low insertion loss <0.2dB
Small package size down to 0.65x0.98mm
Standard Bulk CMOS Technology in high volume factories

1500 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 100)
0,129
(excl. BTW)
0,156
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
0,129 €
12,90 €
500 - 900
0,112 €
11,20 €
1000 - 2400
0,098 €
9,80 €
2500 +
0,086 €
8,60 €
*prijsindicatie
Verpakkingsopties
Related Products
RS232 Isolator click is a fully isolated dual ...
Description:
RS232 Isolator click is a fully isolated dual transceiver click, used to provide secure and easy UART to RS232 conversion, with the galvanic isolation. The digital input and output signals are transmitted across the isolation barrier by utilizing the analogue ...
The SV431DVIUDDM 4-Port USB DVI KVM Switch lets ...
Description:
The SV431DVIUDDM 4-Port USB DVI KVM Switch lets you control 4 DVI, USB-equipped PCs using a single peripheral set at high-definition DVI resolutions up to 1920x1200.The included KVM cables provide a ready-out-of-the-box solution, while USB Dynamic Device Mapping (DDM) and ...
NETGEAR ProSafe Smart Switches fill the gap between ...
Description:
NETGEAR ProSafe Smart Switches fill the gap between unmanaged and fully managed switches. The family of ProSafe Smart Switches is designed for growing businesses that want control over their network without the cost and complexity of a full Layer 2/Layer ...
A comprehensive range of Industrial Ethernet Switches from ...
Description:
A comprehensive range of Industrial Ethernet Switches from Phoenix Contact to suit a variety of applications. Auto negotiation & autocrossing makes for a quick & efficient installation. Various temperature ranges & DIN profiles available. Ethernet switch, various RJ45 port configurations ...