Schneider Electric DP Pole Residual Current Circuit Breaker, 40A iTG40, 300mA

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Acti9 iTG40 RCCBs

Acti9 iTG40 RCCBs limits wear and reduces voltage drops, helping to prevent premature equipment aging and overheating

VisiTrip indicates only the faulty outgoer, allowing fast diagnosis, resolution, and re-closing loads for easier building management and reduced downtime
Insulation Voltage: 440 Vac
Voltage: 230 / 400 Vac
Impulse Voltage: 4 Kv

Specificaties
Kenmerk Waarde
Current Rating 40A
Range Acti 9
Number of Poles DP
Trip Sensitivity 300mA
Series iTG40
Rated AC Voltage 230V
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 26/10/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
167,41
(excl. BTW)
202,57
(incl. BTW)
Aantal stuks
Per stuk
1 +
167,41 €
Related Products
Assembly comprising a two-pole differential switch and a ...
Description:
Assembly comprising a two-pole differential switch and a reset for start-up control and protection.The integrated reset automatically resets the differential switch, but only after checking the insulation of the downstream circuit.This device can be deactivated when people are present in ...
RCCB for alternating and pulsating DC residual currentsOption ...
Description:
RCCB for alternating and pulsating DC residual currentsOption for power connection from above or belowTunnel terminals with wire protection on both sidesCombination terminal at the bottom for simultaneous connection of busbars and conductorsSafe for fingers and overhands according to DIN ...
The Schneider Electric 100A residual current breaker with ...
Description:
The Schneider Electric 100A residual current breaker with overcurrent protection has a 60Hz of network frequency it has instantaneous protection time delay of earth leakage and It used 2P poles. Its net weight is 195g and it used toggle for ...
The ABB F200 RCCB Series provide ground fault ...
Description:
The ABB F200 RCCB Series provide ground fault protection by monitoring the leakage of current to ground when used in conjunction with standard MCBs. The F200 series are compact DIN rail mounted RCCBs and feature a wide range of trip ...