LED Module for use with PR1 Series, PR2 Series, 24V dc

Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: IT
Productomschrijving

Interface module, accessories for interface relay, Series PR1, PR2 and PR3

Plug modules for PR1 / PR2 relay sockets

Type LDP...

LED status display
Release diode
Type LDP is not necessary if you are using Phoenix relays REL-IR-LDP..., as the LED and the release diode are integrated into the relay itself

Type LV...

LED status display
With varistor to limit coil induction voltage and/or external interference peaks

Type RC...

With RC attachment to dampen the coil induction voltage and/or external interference peaks
Reduces coupled interference voltages

Plug modules for PR3 relay socket

Type LV3...

LED status display
With varistor to limit coil induction voltage and/or external interference peaks

Type RC3...

With RC attachment to dampen the coil induction voltage and/or external interference peaks
Reduces coupled interference voltages

Wiring bridges

50-pin, removable
Max. bridging gap 60 mm
Conductor cross section 0.5 mm2

Specificaties
Kenmerk Waarde
Accessory Type Plug In Module
For Use With PR1 Series, PR2 Series
Series LDP- 12- 24DC
Voltage 24V dc
95 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
2,23
(excl. BTW)
2,70
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
2,23 €
25 - 99
2,14 €
100 - 249
2,05 €
250 - 499
1,95 €
500 +
1,86 €
Related Products
The Quick connector allows the coils of 8 ...
Description:
The Quick connector allows the coils of 8 relays to be connected in seconds by pushing in behind the screw terminal versions of the G2RV series (-SL700). A range of standard cables are available separately which enable quick connection into ...
Omron P2RVC series PLC interface units for G2RV-SR ...
Description:
Omron P2RVC series PLC interface units for G2RV-SR and G3RV-SR slim I/O relays. PLC interface units connect to the relay socket terminals and then connect to a PLC using just one PLC connection cable to reduce wiring.
The Crouzet DIN rail mount I/O module is ...
Description:
The Crouzet DIN rail mount I/O module is designed for long, reliable service in demanding industrial environments. These modules provide optical isolation between logic level control systems and external loads. It operates on a supply voltage ranging between 4VDC and ...
These interface earth terminals with screw contracts and ...
Description:
These interface earth terminals with screw contracts and pluggable mini relays make it easy to build up PLC interface relays on a standard EN bus bar and ensure connection. The mini relays are IP67 enclosed so the relay mechanism and ...