SPST Reed Relay, 0.5 A, 5 V dc @ 14 mA

  • RS-stocknr. 888-7953
  • Fabrikantnummer G4ODC5R
  • Fabrikant Opto 22
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: US
Productomschrijving

G4 Digital Dry Contact Output Modules

A professional series of digital dry contact output modules form Opto 22. The G4ODC5R module is a single-pole, single-throw, normally open mechanical relay (Form A, SPST-NO). The G4ODC5R5 module is a single-pole, single-throw, normally closed mechanical relay (Form B, SPST-NC).

Switching voltage of 100Vdc or 130Vac maximum
Resistance of 200 milli-ohms maximum
Mechanical life of 5 million cycles
CE approved
Operation temperature: -30°C to 70°C
Coil 5Vdc at 14mA
Maximum Current = 10VA / Voltage

Note

The application of the dry contact module must not exceed 10VA under steady state or momentary in-rush conditions.

OPTO 22 AC, DC Input & Output Modules

Specificaties
Kenmerk Waarde
Contact Configuration SPST
Coil Voltage 5V dc
Mounting Type Rack, Snap-In
Maximum Switching Voltage AC 130V ac
Maximum Switching Voltage DC 130V dc
Length 12.2mm
Height 41.1mm
Depth 48.8mm
Dimensions 12.2 x 48.8 x 41.1mm
Contact Resistance 200 mΩ
Standards Met CE, CSA
Special Features Analog Signal, Communication Line Multiplexing
Relay Switching Classification General Purpose Relay
Number of Poles 1
Operating Temperature Range -30 → +70°C
Minimum Operating Temperature -30°C
Life 5000000 (Mechanical) cycles
Terminal Type Plug In
Operating Time Including Bounce 250ms
Maximum Operating Temperature +70°C
22 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
30 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
26,27
(excl. BTW)
31,79
(incl. BTW)
Aantal stuks
Per stuk
1 +
26,27 €
Related Products
Cynergy 3 reed relays have high isolation voltages. ...
Description:
Cynergy 3 reed relays have high isolation voltages. These are ideal for applications such as cardiac defibrillators, test equipment and high voltage power supplies. Low contact resistance10kV ot 15kV isolationMinimum insulation resistance 1 x 1014 ΩPCB or flying leads connections. ...
The S2 (UL) reed relay series is designed ...
Description:
The S2 (UL) reed relay series is designed for applications where PCB is not possible. Mounted in a series of positions the S2 (UL) can be orientated to suit. Flexible leadout wires allow bending for equipment assembly. Variable mounting optionsReliable ...
The Cynergy3 S8 series miniature high voltage reed ...
Description:
The Cynergy3 S8 series miniature high voltage reed relay is perfect for applications where space saving is a prime consideration. To give improved isolation between the high voltage contacts and the low voltage coil S8 miniature reed relays have the ...
Miniature reed relay in a dual-in-line (DIL) package ...
Description:
Miniature reed relay in a dual-in-line (DIL) package with a choice of normally open, normally open high-voltage, normally closed or changeover contacts capable of switching up to 300Vdc at 10W. Available with 5V, 12V and 24V coils and diode suppression. ...