Phoenix Contact, Polycarbonate Case in Grey

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Phoenix Contact Raspberry Pi RPI-BC Series, DIN Rail Enclosure

The RPI-BC enclosure from Phoenix Contact is designed to house a Raspberry Pi model A+, B+, B2 or B3. It features tool-free mounting and complies with DIN 43880 enabling it to be integrated in a distributor housing. The RPI-BC housing system can be mounted on a TS 35 DIN Rail or on a wall.

RPI-BC Housing System (DEV KIT)

RPI-BC 107,6 DEV-KIT KMGY (stock no. 122-4298)
A lower housing part (for Din Rail or wall mounting), base latch, upper housing part, housing cover and PCB holder for mounting the Raspberry Pi board
Light grey

RPI-BC Lower Housing Part

BC 107,6 UT HBUS KMGY (stock no. 122-4305)
A lower housing part and base latch (for Din Rail or wall mounting)
Light grey

RPI-BC Upper Housing Part

RPI-BC 107,6 DEV-KIT KMGY P10 (stock no. 122-4299)
An upper housing part and PCB holder for mounting the Raspberry Pi board
Light grey

RPI-BC Accessories

RPI-BC A+-ADAPTER ATGY (stock no. 122-4300) - an adapter for mounting the Raspberry Pi A+ model
RPI-BC EXT-PCB HBUS SET (stock no. 122-4304) a Perfboard and pin strip for connecting to the DIN Rail HBus connector
RPI-BC INT-PCB SET (stock no. 122-4303) a Perfboard, includes socket strips for the GPIO connection, solder rings for PTSM header, includes PTSM plugs and headers
PSTD 0,65X0,65/40-2,54 (stock no. 122-4301) a socket strip for connecting the RPI-BC INT-PCB SET Perfboard (or another additional PCB) to the GPIOs of the Raspberry Pi computer
PSTD 0,65X0,65/18-3IS-2,54 (stock no. 122-4302) a pin strip for connecting the RPI-BC EXT-PCB HBUS SET Perfboard (or another additional PCB) to the DIN Rail HBus connector

Note

Further PCBs can also be inserted in the housing in addition to the Raspberry Pi board.

Specificaties
Kenmerk Waarde
Colour Grey
Series RPI-BC
Body Material Polycarbonate
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
15 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
13,53
(excl. BTW)
16,37
(incl. BTW)
Aantal stuks
Per stuk
1 +
13,53 €
Related Products
The Amp HAT Case is a suitable enclosure ...
Description:
The Amp HAT Case is a suitable enclosure for the Raspberry Pi and Amp HAT.The 2 piece case is easy to use and protects the devices.JustBoom Digi HAT is available here at RS (RS 1228183).For guide see URL : ... ...
The Phoenix Contact grey, polycarbonate electronic housing for ...
Description:
The Phoenix Contact grey, polycarbonate electronic housing for PCB’s is a perfect solution for attaching and protecting the B2 and B3 model of Raspberry Pi.The complete Raspberry Pi case includes half-shell housing, side panels with cut out openings for all ...
1.4GHz 64-bit quad-core processor, dual-band wireless LAN, Bluetooth ...
Description:
1.4GHz 64-bit quad-core processor, dual-band wireless LAN, Bluetooth 4.2/BLE in the same mechanical format as the Raspberry Pi 1 Model A+. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz512MB LPDDR2 SDRAM2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLEExtended 40-pin ...
OKdo Standard Clear Case has been specifically designed ...
Description:
OKdo Standard Clear Case has been specifically designed for use with the Raspberry Pi 4 Model B. It is a 3-piece rugged clear ABS plastic case providing protection whilst allowing access to all its ports and PINs.