Raspberry Pi, Plastic Case for use with Raspberry Pi 2B, Raspberry Pi 3B, Raspberry Pi 3B+ in Black, Grey

  • RS-stocknr. 103-4298
  • Fabrikantnummer TZT 241 AAB-01
  • Fabrikant Raspberry Pi
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Official Case for Raspberry Raspberry Pi 3 B

From Raspberry Pi the official Raspberry Pi 3 case designed to enclose and protect your Raspberry Pi 3 Model B development board. This Raspberry Pi 3 case is both stylish and lightweight and made from high quality moulded plastic. The RPi case has a modular construction consisting of 5 pieces which easily snap together without the need for any tooling or screws. The modular design of this Pi 3 Model B case means allow the sides and top to be removed allowing quick access to internal GPIO connections and interfaces

Raspberry Pi 3 Model B Case Components

Two Part Case Body

The main body of this Raspberry Pi 3 case consists of a top half and bottom half that snap together to form a protective covering for the RPi and other sensitive electronic components. The Raspberry Pi 3 enclosure features cut outs for micro-SD, USB and Ethernet ports. Apertures or light tunnels in the sides of the enclosure allow status LEDs to be visible through the case. Pegs incorporated into the base of the case are designed to fit the holes on the RPi board for accurate alignment. The top of the Raspberry Pi case features a large cut-out allowing room for accessory cables. Anti-slip stick on feet are provided to secure the base of the Pi case firmly to a surface.

2 x Sides and Lid

The sides and lid of this modular Raspberry Pi case are both easily removable providing design flexibility and allowing easy access to internal connections such as GPIO pins. The sides incorporate cut-outs for all the main connector ports. The lid provides protection to the internal components and its sleek, polished design provides an attractive appearance. The official Raspberry Pi case can also be used without the lid which allows space when using HAT (Hardware Attached on Top) boards as well as offering extra ventilation.

Key Features and Benefits

• Suitable for use with Raspberry Pi 3 Model B development board
• Easy to assemble snap together modular design
• Compact, stylish and lightweight
• Apertures for visibility of status LEDs though the case
• Removable sides and lid for easy access to GPIO pins and interfaces
• Pegs in base for alignment of Raspberry Pi 3 board
• Cut-outs for primary ports including micro-SD port
• Large cut out in top cover for accessory cables
• Anti-slip stick on feet for secure mounting
• Available in a choice of eye catching colours

Note

This Official Raspberry Pi case is designed for the Raspberry Pi 3 Model B, but it will also protect your Raspberry Pi B+ or Raspberry Pi 2 if you can accept blocking the LED light pipes.

Raspberry Pi development board is not included

Specificaties
Kenmerk Waarde
For Use With Raspberry Pi 2B, Raspberry Pi 3B, Raspberry Pi 3B+
Series Official
Colour Black, Grey
External Dimensions 97 x 70 x 25mm
Body Material Plastic
22016 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Box of 256)
5,648
(excl. BTW)
6,834
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
256 +
5,648 €
1.445,888 €
*prijsindicatie
Related Products
Complete housing for printed-circuit boards. Includes housing half ...
Description:
Complete housing for printed-circuit boards. Includes housing half shells, side panels with openings for all relevant connections, adhesive pads for affixing the Raspberry Pi model B2 and B3 computers, screws for housing and PCB attachment, black housing with turquoise blue ...
The Phoenix Contact grey, polycarbonate electronic housing for ...
Description:
The Phoenix Contact grey, polycarbonate electronic housing for PCB’s is a perfect solution for attaching and protecting the B2 and B3 model of Raspberry Pi.The complete Raspberry Pi case includes half-shell housing, side panels with cut out openings for all ...
Exclusively for use with Raspberry PiCompatible with Raspberry ...
Description:
Exclusively for use with Raspberry PiCompatible with Raspberry Pi 2B, 3B and 3B+ boardsAll aluminium, polished and elegant metallic silver finish3 types are available: normal, double-layered, and flangedThe internal part is made to be conductiveRaspberry Pi Board is not included. ...
The 52Pi Nes4pi case is a retro-style raspberry ...
Description:
The 52Pi Nes4pi case is a retro-style raspberry pi game console shell with very good heat dissipation performance and retro appearance. It can help raspberry Pi 4B cool down during you play games. It used 3510 fan inside. Heatsinks includeEasy ...