- RS-stocknr.:
- 175-1108
- Fabrikantnummer:
- STEVAL-IDB007V2
- Fabrikant:
- STMicroelectronics
1 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 69,46
(excl. BTW)
€ 84,05
(incl. BTW)
Aantal stuks | Per stuk |
1 - 1 | € 69,46 |
2 - 4 | € 67,63 |
5 - 9 | € 65,90 |
10 + | € 64,25 |
- RS-stocknr.:
- 175-1108
- Fabrikantnummer:
- STEVAL-IDB007V2
- Fabrikant:
- STMicroelectronics
Datasheets
Wetgeving en conformiteit
Productomschrijving
STMicroelectronics Evaluation Board
The STMicroelectronics evaluation board is a platform based on the BlueNRG-1, low power Bluetooth smart system on a chip, compliant with the Bluetooth® specification and supporting master, slave and simultaneous master-and-slave roles. It has three power options (USB only, battery-only and external power supply plus USB) for high application development and testing flexibility. This contains a battery holder and comes with a JTAG debug connector.
Features and Benefits:
• 3D digital accelerometer and 3D digital gyroscope
• Associated BlueNRG-1 development kit SW package including firmware and documentation
• Bluetooth low energy compliant, supports master, slave and simultaneous master-and-slave roles
• Excellent receiver sensitivity (-88dBm)
• Jumper for measuring current for BlueNRG-1 only
• MEMS pressure sensor with an embedded temperature sensor
• New integrated balun BALF-NRG-02D3 that integrates a matching network and harmonics filter
• SMA connector for antenna or measuring equipment
• Up to +8dBm available output power (at antenna connector)
• USB to the serial bridge for providing I/O channel with the BlueNRG-1 device
• Very low power consumption: 7.7mA RX and 8.2mA TX at +0dBm
• Associated BlueNRG-1 development kit SW package including firmware and documentation
• Bluetooth low energy compliant, supports master, slave and simultaneous master-and-slave roles
• Excellent receiver sensitivity (-88dBm)
• Jumper for measuring current for BlueNRG-1 only
• MEMS pressure sensor with an embedded temperature sensor
• New integrated balun BALF-NRG-02D3 that integrates a matching network and harmonics filter
• SMA connector for antenna or measuring equipment
• Up to +8dBm available output power (at antenna connector)
• USB to the serial bridge for providing I/O channel with the BlueNRG-1 device
• Very low power consumption: 7.7mA RX and 8.2mA TX at +0dBm
Applications:
• Debug message management through USB
• Remote control (buttons and LEDs)
• Sensor data (accelerometer, pressure and temperature sensor),
• Remote control (buttons and LEDs)
• Sensor data (accelerometer, pressure and temperature sensor),
Specificaties
Kenmerk | Waarde |
---|---|
Kit Classification | Development Kit |
For Use With | BlueNRG-1 |
Featured Device | STEVAL-IDB007V2 |
Kit Name | Evaluation Board |