Adafruit RFM96W LoRa 433MHz RF Transceiver Breakout Board

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Adafruit LoRa Packet Radio Transceiver Breakout Board - 433 MHz

LoRa is short for Long Range Radio and is designed primarily for M2M and IoT applications. The trade-off for the extra distance is reduced speed and bandwidth but for the applications it is aimed at this is not an issue.
The 433 MHz LoRa radio module uses a special radio modulation. This enables data transmission up to 2 Km line of sight using simple wire antennas or up to 20 Km with directional antennas and some adjustment to settings.

LoRa packet radios are simpler than WiFi or BLE as you do not need to associate, pair or scan for connections. When you send data, any modules tuned to the same frequency and with the same encryption key receives it. The receiver can then send a reply. The modules split the data into packets, error correct and can also auto-retransmit.

These modules are great for use with Arduino or other microcontrollers particularly for something like a sensor network.

Each radio module is supplied with headers, a 3.3 V voltage regulator and levelshifter that can handle 3 to 5 V dc power and logic so you can use it with 3 V or 5 V devices. Some soldering is required to attach the header.

- Packet radio with ready-to-go Arduino libraries
- Transmits on the amateur or license-free ISM band
- SX1276 LoRa based module with SPI interface
- Use a simple wire antenna or spot for uFL / SMA antenna
- +5 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)
- ∼100 mA peak during +20 dBm transmit, ∼30 mA during active radio listening
- Range of approximately 2 km, depending on obstructions, frequency, antenna and power output
- All radio modules are sold individually and can only talk to radios of the same part number. For example, LoRa 433 MHz can only talk to LoRa 433 MHz.
- Dimensions: 29 x 25 x 4 mm (1.14" x 1.0" x 0.2")
- Weight: 3.1 g

Wireless Modules - Adafruit

Specificaties
Kenmerk Waarde
RF Technology RF Transceiver
Kit Classification Breakout Board
Frequency 433MHz
Kit Name RFM96W LoRa
20 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
18,13
(excl. BTW)
21,94
(incl. BTW)
Aantal stuks
Per stuk
1 +
18,13 €
Related Products
The BarGraph click add-on board has been specially ...
Description:
The BarGraph click add-on board has been specially designed to incorporate a ten-segment light bar display to your design - great for VU meters.Key Features of the BarGraph click•mikroBUS™ pinout standard•JSB-R102510Z light bar display•2 x 74HC595 shift registers•Suitable for 3.3 ...
The Thunder click is an add-on board with ...
Description:
The Thunder click is an add-on board with a great safety feature in the detection of nearby lightning - perfect for applications such as weather stations, watches, sports equipment, UPS and GPS.Key Features & Benefits of the Thunder click• mikroBUS™ ...
The I-NUCLEO-LRWAN1 is an RF wireless communication Nucleo ...
Description:
The I-NUCLEO-LRWAN1 is an RF wireless communication Nucleo expansion board for long-range working featuring LoRa™ Chirp Spread-Spectrum (CSS) technology. A LoRaWAN™ middleware stack is certified for Class A and provides support for Class C end-devices. • 32MHz STM32L052T8Y6 Cortex-M0+ MCU ...
The Click accessory modules plug into the MikroBUS ...
Description:
The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. WiFi PLUS Click is a compact solution for adding WiFi communication to your project. MRF24WB0MA 2.4GHz, IEEE 802.11 compliant moduleMCW1001 companion controller with on-board TCP/IP stack ...