onsemi NCP12700BDNR2G, PWM Controller, 100 V, 1 MHz 10-Pin, MSOP
- RS-stocknr.:
- 178-4349
- Fabrikantnummer:
- NCP12700BDNR2G
- Fabrikant:
- onsemi
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 178-4349
- Fabrikantnummer:
- NCP12700BDNR2G
- Fabrikant:
- onsemi
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- MY
Productomschrijving
The NCP12700 is a fixed frequency, peak current mode, PWM controller containing all of the features necessary for implementing single-ended power converter topologies. The device features a high voltage startup capable of operating over a wide input range (9 – 120/200 V MSOP10/WQFN10) and supplying at least 20 mA to provide temporary bias to VCC during system startup.
Simplify design and reduce BOM cost
No sub-harmonic oscillation in CCM mode .
Easy and flexible
Drive any type of MOSFET's
To protect the design or bring the controller into a low
quiescent state
Robust and safe design
No sub-harmonic oscillation in CCM mode .
Easy and flexible
Drive any type of MOSFET's
To protect the design or bring the controller into a low
quiescent state
Robust and safe design
Specificaties
Kenmerk | Waarde |
|---|---|
| Maximum Switching Frequency | 1 MHz |
| Output Voltage | 14 V |
| Output Current | 1 A, 2.8 A |
| Number of Outputs | 1 |
| Control Method | Current |
| Fall Time | 10ns |
| Mounting Type | Surface Mount |
| Package Type | MSOP |
| Rise Time | 15ns |
| Pin Count | 10 |
| Dimensions | 3.1 x 3.1 x 0.95mm |
| Maximum Duty Cycle | 84% |
| PWM Controller Type | Current Mode |
| Length | 3.1mm |
| Width | 3.1mm |
| Height | 0.95mm |
| Maximum Operating Supply Voltage | 100 V |
| Maximum Operating Temperature | +125 °C |
| Minimum Operating Temperature | -40 °C |