JG Speedfit Polyethylene Pipe, 2m long x 15mm OD
- RS-stocknr.:
- 756-501
- Fabrikantnummer:
- 15BPEX-20X2L
- Fabrikant:
- JG Speedfit
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 756-501
- Fabrikantnummer:
- 15BPEX-20X2L
- Fabrikant:
- JG Speedfit
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- GB
Productomschrijving
Barrier Pipe - Speedfit
Cross-linked to polythene pipe tested to DIN 16892
Supplied in either 2 metre lengths in bundles of five or in 25 metre coils
Supplied in either 2 metre lengths in bundles of five or in 25 metre coils
Note
Pipe inserts are recommended for installations using plastic pipe (see this section)
Caution
DO NOT USE FOR: Gas, fuel oil or compressed air applications
Standards
BS EN ISO 9001: BS 7291 Parts 1 & 3 Class S
Approvals
Approved to WRC, BBA, PKM, PEM
Approvals
WRC; BBA; PKM; PEM
Standards
BS EN ISO 9001; BS 7291 Parts 1 & 3 Class S
SpeedFit Tube, Conduits & Tube Inserts
Pipe Suitability - Speedfit fittings can be used with: Copper pipe to BS2871 Part 1 / BSEN 1057: 1996, Speedfit cross linked polyethylene (PEX) Barrier Pipe to BS7291. Speedfit fittings cannot be used on stainless steel pipe.,Applications - Mains fed and indirect cold water systems, vented and unvented hot water systems and vented and sealed central heating systems.,Material - Polysulfone, Acetal
Specificaties
Kenmerk | Waarde |
|---|---|
| Length | 2m |
| Outer Diameter | 15mm |
| Material | PE |