Schneider Electric Screw Clamp 2NO (Push Button), NC (E-Stop) 2 Push Button Pendant Station

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Standard Pushbutton

Pre assembled double insulated crane pendants for single speed motor applications
Mechanically interlocked between pairs
For light duty Pendant switch see also Stock no 507481

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65
Fitted cable clamps and stepped cable entry boots
Mechanical interlocking between each pair of opposing pushbutton actuators
Adapters supplied for self-supporting pendant cable, with lug for chain support

Specificaties
Kenmerk Waarde
Series Harmony XACA
Number of Cutouts 2
Push Button Marking Down Arrow, Up Arrow
Push Button Colour Red
Push Button Style Mushroom
Number Of Push Buttons 2
Enclosure Colour Yellow
Enclosure Material PP
Contact Configuration NC (E-Stop), 2NO (Push Button)
IP Rating IP65
Push Button Actuation Trigger Action
Cable Termination Type Screw Clamp
Length 80mm
Maximum Current 1.2 A @ 600 V ac, 100 mA @ 600 V dc
Maximum Operating Temperature +70°C
Maximum AC Voltage 600V
Maximum DC Voltage 600V
Depth 314mm
Minimum Operating Temperature -25°C
Dimensions 80 x 107 x 314 mm
Width 107mm
Terminal Type Screw
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
13 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
64,99
(excl. BTW)
78,64
(incl. BTW)
Aantal stuks
Per stuk
1 +
64,99 €
Related Products
Pendant control stations for auxiliary circuits. Designed for ...
Description:
Pendant control stations for auxiliary circuits. Designed for mechanical handling, these highly robust pendant control stations comply with the safety requirements of IEC standards. CE markingUL/CSA certificationIP65Double insulated polypropylene casingScrew clamp connection.
Pendant control stations for auxiliary circuits. Designed for ...
Description:
Pendant control stations for auxiliary circuits. Designed for mechanical handling, these highly robust pendant control stations comply with the safety requirements of IEC standards. CE markingUL/CSA certificationIP65Double insulated polypropylene casingScrew clamp connection.
Pistol-grip pendant control stations for simple hoisting applications. ...
Description:
Pistol-grip pendant control stations for simple hoisting applications. All opposing pairs of switches are mechanically interlockedSwitching current 10AIP65 ratedHoist and lowering functions only.
The ’Intuitive’ pendant station offers dual control from ...
Description:
The ’Intuitive’ pendant station offers dual control from a single pushbutton, the required movement of the thumb reflecting the movement of the load. The design prevents unwanted operation when not in use. Ergonomically designed to fit the shape of the ...