Siemens Lamp for use with 3SB2 Series

  • RS-stocknr. 612-9905
  • Fabrikantnummer 3SB2908-1AC
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

3SB2 - Accessories

Switching element

N/O or N/C contact
For inserting the holder or lamp holder

The 3SB2 range from Siemens offers various accessories to accompany the pilot devices including, Incandescent lamps, fixing collars and holders for contact blocks.

24 V / 1 W
With wedge base W 2 x 4.6 d

Plug connector

Push-on terminal for male tab 2.8 x 0.8 mm
Insulating sleeve for male tab, may be pushed on from the front

Backing plate

Yellow, 50 mm
Self adhesive
Without label or
With "EMERGENCY STOP" label

Tool

Removal tool for holder and lamp holder with holder
Lamp gripper for lamps with W2 x 4,6 d base

Approvals

  CE

Specificaties
Kenmerk Waarde
Accessory Type Incandescent lamp
For Use With 3SB2 Series
25 op voorraad - levertijd is 1 werkdag(en)
Prijs 1 Bag of 10
Was 10,91 €
9,77
(excl. BTW)
11,82
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 - 4
9,77 €
0,977 €
5 - 9
9,37 €
0,937 €
10 +
9,06 €
0,906 €
*prijsindicatie
Related Products
The following accessories are available for the ZB6 ...
Description:
The following accessories are available for the ZB6 Range:. Lamp holder T1 1/4 24V, will not accept contact blocksBezel keys (tools)Lens extractorConnector for PCB mountingBulbsLEDs.
A potentiometer (not supplied) having a shaft length ...
Description:
A potentiometer (not supplied) having a shaft length of 43 to 47mm, and diameter 6.35mm may be mounted into this unit and fixed to a panelThe potentiometer is fitted from the rear, and the projecting shaft at the front can ...
All actuators have matt chromed bezels and ingress ...
Description:
All actuators have matt chromed bezels and ingress protection to IP65 as standard. Contact blocks, LED modules and transformers can all be purchased separately. Contact clip 333E gives 3 contact configuration and can be used to adapt old style heads ...
The 800F range of Push Buttons is designed ...
Description:
The 800F range of Push Buttons is designed and manufactured to meet demanding performance specifications. Using state-of-the art solid modelling techniques, each component built into 800F Push Buttons is optimized for durability and safe performance.,Designed to conform with the industry ...