Siemens Enclosed Push Button for use with 3SB3 Series

  • RS-stocknr. 411-1996
  • Fabrikantnummer 3SB3901-0AB
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Contact Block Adaptors

Pushbutton and selector switch / keyswitch versions available
Selector switch / keyswitch version has thrust pads for knob, lock, and twin pushbuttons for actuating the centre contact

PHASE OUT NOTIFICATION

This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the new pushbutton range SIRIUS ACT which is the alternative range proposed by the manufacturer. Please refer to the 3SB3 / SIRIUS ACT cross-reference guide located in the technical reference section.

Specificaties
Kenmerk Waarde
Accessory Type Holder
For Use With 3SB3 Series
291 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
248 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
0,60
(excl. BTW)
0,73
(incl. BTW)
Aantal stuks
Per stuk
1 +
0,60 €
Related Products
Panel mounting for use in Zone 1 hazardous ...
Description:
Panel mounting for use in Zone 1 hazardous areas. Maximum panel thickness is 5mm and the mounting hole required is 30.5mm diameter.,Front element is fixed to panel using the clamp nut. Body/contact block components fitted from rear utilising the built ...
A range of control devices with an IP65 ...
Description:
A range of control devices with an IP65 protection rating and conforming to IEC 947-5-1. Standard fixing aperture is 16mm. Behind panel depth (including terminals) is only 49mm. ,The devices can be butted together allowing a greater number of devices ...
Illuminated Pushbutton, 16 mm seriesWith flat press studN/O ...
Description:
Illuminated Pushbutton, 16 mm seriesWith flat press studN/O or N/C contact blockIntegrated lamp holder W2 x 4.6 dAvailable with or without incandescent lampFront panel mountingPlastic versionTab connection 2.8 x 0.8 mmAccessories, see RS Stock No. 612-9882.
Harmony XB7 push buttons can be used in ...
Description:
Harmony XB7 push buttons can be used in control systems that require high-performance, compact and easy-to-install components. They are specially desgined for industry applications. Push button with integral LEDLatch pushErgonomic design in different coloursEasy to installComplete unitRobust, durable controls for ...