Greenlee Punch and Die Tool, 32.5mm, Circular, Hand Operation

  • RS-stocknr. 388-6346
  • Fabrikantnummer 50351796
  • Fabrikant Greenlee
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: US
Productomschrijving

ISO Hand Punches

Slug buster are round and special shape punches with a unique profile for slug splitting, allowing easy slug removal. Slug buster punches are usually suitable for mild steel, plastic and aluminium up to 3.5mm thick. Their application is also for manual and hydraulic operation.

Features and Benefits

• All punches are ISO standard sizes
• Use with manual, ratchet or hydraulic punch drivers
• Will punch mild steel, aluminium, fibreglass and plastic up to 3 mm

Specificaties
Kenmerk Waarde
Cutting Capacity Mild Steel: 3 mm; Aluminium: 3 mm; Fibreglass and Plastic; 3 mm
Hole Shape Circular
Hole Size 32.5mm
Operation Hand
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
9 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
66,40
(excl. BTW)
80,34
(incl. BTW)
Aantal stuks
Per stuk
1 +
66,40 €
Related Products
Round knockout punches used to punch holes in ...
Description:
Round knockout punches used to punch holes in most panel materials, except stainless steel or other hardened metals. The knockout punches are designed for use with DMR20 series panel meters from Murata. • Punch up to 30 mm hole• Acceptable ...
Key-notch nibbler tool is used to punch square ...
Description:
Key-notch nibbler tool is used to punch square holes in most panel materials, except stainless steel or other hardened metals. The nibbler tool is designed for use with DMR20 series panel meters from Murata. • Punches 3.2 or 4.7 mm ...
Description:
Will punch up to 3.5mm in mild and stainless steel, fibreglass/plasticsSplit slugs fall free and cannot cling to draw studGreatly increased life expectancy compared to standard punchesAvailable in 16 sizes including Pg and ISO sizesUse size 1 draw bolt for ...
Use to punch burr-free holes for switches and ...
Description:
Use to punch burr-free holes for switches and instruments in enclosures. Die alignment marks for accurate alignmentPunch up to 3.0mm mild steel and up to 1.5mm stainless steel (punching stainless steel reduces lifetime of punches)Supplied complete with punch, die, draw ...