Trenz Electronic GmbH TE0726-03M ZynqBerry - Zynq-7010 in Raspberry Pi form factor TE0726-03

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

The Trenz Electronic TE0726-03M is a Raspberry Pi compatible SoC module integrating a Xilinx Zynq-7010, 512 MByte DDR3L SDRAM, 4 USB ports, an Ethernet port and 16 MByte Flash memory for configuration and operation. All parts are at least commercial temperature range of 0°C to +70°C.

Xilinx Zynq XC7Z010-1CLG225C
512 MByte DDR3L SDRAM
16 MByte Flash
Raspberry Pi Model 2 form factor
LAN9514 USB Hub with Ethernet
4 x USB with power switches
100 MBit Ethernet RJ45
Micro SD card slot
HAT header with 26 I/O's
HDMI Typ A
DSI Connector (Display)
CSI-2 Connector (Camera)
Micro USB
power input
USB UART
JTAG ARM- und FPGA-Debug
3.5 mm audio plug (PWM Audio output only)

Specificaties
Kenmerk Waarde
Classification Module
Featured Device TE0726-03
Kit Name ZynqBerry - Zynq-7010 in Raspberry Pi form factor
9 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
133,80
(excl. BTW)
161,90
(incl. BTW)
Aantal stuks
Per stuk
1 +
133,80 €
Related Products
The Arty Z7-20 is a development platform designed ...
Description:
The Arty Z7-20 is a development platform designed around the Xilinx Zynq-7000™ All Programmable System-on-Chip (AP SoC). The Zynq-7000 architecture integrates a dual-core, 650MHz ARM Cortex-A9 processor with Artix-7 series FPGA logic. This pairing surrounds a powerful processor with a ...
The CLT3-4B is a quadruple logic input termination/TVS ...
Description:
The CLT3-4B is a quadruple logic input termination/TVS protection for sensor or mechanical switch interfaces. It is designed to work in 24Vdc applications such as PLCs (programmable logic controllers), PACs (programmable automation controllers) and distributed I/O systems used in factory ...
The AD9244 is a monolithic, single +5V supply, ...
Description:
The AD9244 is a monolithic, single +5V supply, 14-bit, 40/65MSPS ADC with an on-chip, high performance sample-and-hold amplifier (SHA) and voltage reference. 750MHz analogue input bandwidthSNR>73dBc to Nyquist @ 65MSPSSFDR>86dBc to Nyquist @ 65MSPSDifferential nonlinearity error = ±0.7 LSBGuaranteed no ...
The ADCLK914 is an ultrafast clock/data buffer featuring ...
Description:
The ADCLK914 is an ultrafast clock/data buffer featuring high voltage differential signaling (HVDS) outputs. The evaluation board is fabricated using a high quality dielectric material between layers to maintain high signal integrity. Transmission line paths are kept as close to ...