LTC6910-1CTS8#TRMPBF Linear Technology, Programmable Gain Amplifier, Rail to Rail Input/Output 55dB, 8-Pin TSOT-23

  • RS-stocknr. 151-3103
  • Fabrikantnummer LTC6910-1CTS8#TRMPBF
  • Fabrikant Analog Devices
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The LTC6910 family are low noise digitally programmable gain amplifiers (PGAs) that are easy to use and occupy very little PC board space. The inverting gain is adjustable using a 3-bit digital input to select gains of 0, 1, 2, 5, 10, 20, 50 and 100V/V in the LTC6910-1, 0, 1, 2, 4, 8, 16, 32 and 64V/V in the LTC6910-2, and 0, 1, 2, 3, 4, 5,6 and 7V/V in the LTC6910-3. The LTC6910-Xs are inverting amplifiers with rail-to-rail output.

3-Bit Digital Gain Control in Three Gain-Code Options
Rail-to-Rail Input Range
Rail-to-Rail Output Swing
Single or Dual Supply: 2.7V to 10.5V Total
11MHz Gain Bandwidth Product
Input Noise Down to 8nV/rtHz

Specificaties
Kenmerk Waarde
Power Supply Type Dual
Typical Dual Supply Voltage 10.5 (Maximum)V
Maximum Input Offset Voltage 1.5mV
Maximum Input Resistance >100MΩ
Number of Channels per Chip 1
Rail to Rail Rail to Rail Input/Output
Mounting Type Surface Mount
Package Type TSOT-23
Pin Count 8
Minimum CMRR 55dB
Output Type Rail-to-Rail
Dimensions 2.9 x 1.75 x 0.9mm
Height 0.9mm
Width 1.75mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Length 2.9mm
500 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (On a Reel of 500)
1,571
(excl. BTW)
1,901
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
500 - 1000
1,571 €
785,50 €
1500 +
1,532 €
766,00 €
*prijsindicatie
Related Products
Low input offset voltage: 200 μV max.Low current ...
Description:
Low input offset voltage: 200 μV max.Low current consumption: 800 μA max.Gain bandwidth product: 2.7 MHzPower supply operation from 2.7 V to 16 VESD high tolerance: 4 kV (HBM)Extended temperature range: -40°C to +125°CAutomotive qualification.
The NCx2007x series operational amplifiers provide rail−to−rail output ...
Description:
The NCx2007x series operational amplifiers provide rail−to−rail output operation, 3 MHz bandwidth, and are available in single, dual, and quad configurations. Rail−to−rail operation enables the user to make optimal use of the entire supply voltage range while taking advantage of ...
MCP601 operational amplifier (op amp) has a gain ...
Description:
MCP601 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 uA and an offset voltage that is less than 2 mV. The MCP601 uses Microchip's advanced CMOS technology, which provides ...
Rail-to-Rail input and output voltage rangesSingle (or dual) ...
Description:
Rail-to-Rail input and output voltage rangesSingle (or dual) supply operation from 2.7 V to 16 VLow input bias current: 1 pA typicalLow input offset voltage: 5 mV max. (A grade)Specified for 600 Ω and 100 Ω loads.