COAX Connectors 75Ω Straight PCB Mount BNC Connector, jack

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

BNC PCB Mount Jacks

A series of 75 Ω professional quality machined PCB mount jacks, from Coax Connectors. These BNC connectors have nickel plated brass bodies and gold plated centre contacts. The solder BNC connectors feature a simple bayonet coupling which requires only a quarter turn to connect and disconnect for quick and easy termination. This comprehensive range is available in different body styles and mounting heights. The BNC connectors would be typically used in the broadcast market and have been tested to meet SMPTE 292M and 424M standards.
Part number 916-0631 right angled bulkhead jack
Part number 916-0643 vertical mount jack
Part number 916-0653 straight jack 3 legs
Part number 916-0662 vertical mount jack legs rotated 45°
Part number 916-0640 straight jack 4 legs
Part number 916-0659 right angled bulkhead jack surface mount centre contact

Coax Connectors BNC Series

Specificaties
Kenmerk Waarde
Gender Female
Coaxial Connector Type BNC Connector
Mounting Type PCB Mount
Impedance 75Ω
Termination Method Through Hole
Body Orientation Straight
Size Standard
Bulkhead No
Operating Frequency 0 to 4.5GHz
Body Plating Nickel
Contact Material Phosphor Bronze
Contact Plating Gold
46 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1,60
(excl. BTW)
1,94
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
1,60 €
5 - 9
1,50 €
10 - 24
1,44 €
25 - 49
1,37 €
50 +
1,28 €
Related Products
The Phoenix Contact range of BNC connectors are ...
Description:
The Phoenix Contact range of BNC connectors are suitable for ’G’ and ’Top Hat’ rail mounting. The connectors allow accurate and clear wiring in large systems. The insulated housing eliminates the danger of accidental contact between the coax shield and ...
A range of BNC Jack to Jack Bulkhead ...
Description:
A range of BNC Jack to Jack Bulkhead Adaptors supplied with Hex Nut and Lockwasher .These BNC Jack to Jack Bulkhead Adaptors require a cut out of Ø12.7 mm with 12.1 mm flat.
A range of 75 Ohm right angle PCB, ...
Description:
A range of 75 Ohm right angle PCB, panel mount BNC RF coaxial jacks with a a polymethylpentene dielectric and a gold plated centre contact. These 75 Ohm bulkhead mount BNC right angle RF coax jack connectors are available with ...
75Ω RF Connectors, ideal for use in telecommunication ...
Description:
75Ω RF Connectors, ideal for use in telecommunication applications on digital distribution frames. Available in two styles, as either standard BT style or high density HDC versions. The cable mounted sockets have a latching mechanism to prevent accidental disconnection. To ...