Sensirion SHTC1 Xplained Pro Extension Board, Temperature & Humidity Sensor Extender Board for Atmel Xplained Pro

  • RS-stocknr. 898-6729
  • Fabrikantnummer SHTC1 Xplained Pro Extension Board
  • Fabrikant Sensirion
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CH
Productomschrijving

SHTC1 & SHTW1 Wing Boards for Atmel Xplained Pro

Two extension boards from Sensirion designed for use with the Atmel Xplained Pro evaluation boards.
They features the SHTC1 and SHTW1 humidity and temperature sensor ICs which are designed for high-volume consumer electronics. The SHTC1 has a compact DFN package with a 2 x 2 mm footprint whilst the SHTW1 comes in an even smaller 1.3 x 0.7 mm WLCSP package. These devices offer low power consumption and incorporate a capacitive humidity sensor, bandgap temperature sensor, analogue and digital signal processing, ADC, calibration data memory, and a digital communication interface supporting I²C fast mode.
These wing boards can be attached to the Atmel Xplained Pro board alongside any of the existing extension boards. This opens the user up to touch controls and display capabilities quickly and easily.

898-6729 · Wing Board with SHTC1
123-7129 · Wing Board with SHTW1

Temperature & Humidity Sensors, Sensirion

Specificaties
Kenmerk Waarde
Sensor Technology Temperature & Humidity Sensor
For Use With Atmel Xplained Pro
Kit Classification Extender Board
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
19,62
(excl. BTW)
23,74
(incl. BTW)
Aantal stuks
Per stuk
1 +
19,62 €
Related Products
This pHAT provides a super affordable high-quality DAC ...
Description:
This pHAT provides a super affordable high-quality DAC for your Raspberry Pi. It pumps out 24-bits at 192KHz from the Raspberry Pi's I2S interface on its 2x20 pin GPIO header. Use pHAT DAC to build a tiny, lush-sounding streaming music ...
Demonstration boards for the Silicon Labs TS1105 Unidirectional ...
Description:
Demonstration boards for the Silicon Labs TS1105 Unidirectional Current Sense Ampliter with buffered unipolar output and adjustable bias. The TS1105 high-side current-sense amplifier uses 0.68 μA (typical) and buffered output 0.76 μA (typical).Available with two gain options;20 V/V - TS1105-20 ...
The Microchip display development board is a highly ...
Description:
The Microchip display development board is a highly integrated, compact and flexible development platform with a 4.3in colour LCD. It integrates with the PIC32MZ starter kits for a complete graphics development solution. The MEB-II kit features a 4.3inch WQVGA maXTouch ...
The DLP Design DLP-ECON-F1 E Ink Display Controller ...
Description:
The DLP Design DLP-ECON-F1 E Ink Display Controller consists of the electronic components necessary to update the image on the e-paper display. It is done via a simple TTL serial interface typically found in microcontrollers. All models are highly reliable ...