Wieland R1.190.1000.0 Memory Card, For Use With Samos PRO COMPACT Safety Controller

  • RS-stocknr. 871-4615
  • Fabrikantnummer R1.190.1000.0
  • Fabrikant Wieland
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Wieland Samos PRO COMPACT Safety Control

The samosPRO Compact is suitable for monitoring non-contact safety sensors, emergency off buttons, protective door switches and door closures, two-hand controls as well as testable safety light barriers, light curtains and laser scanners. Not only is it suitable for use in machinery and plant engineering but also, for example, for safety-related control tasks in elevator installations, industrial combustion plants and process technology systems.

24 safe in- and outputs on 45 mm construction width for space and cost savings
USB and Ethernet interfaces for remote maintenance always on board
Industrial Ethernet protocols integrated
512 kb program memory offers space for each project
4 A switching power at each output
Ambient temperature -25 to +65 °C
Modular extendability to up to 172 secure in-/outputs
Optical display of all in- and outputs in system
Pluggable connection technology with either screw or push-in terminal blocks

SP-COP1 COMPACT Module

SILCL 3 (EN 62061-1)
PL e / Category 4 (EN ISO 13849-1)
20 safe inputs, 4 safe outputs
USB interface
SD slot for program memory (memory card ordered separately, stock no. 871-4615)

SP-COP2 COMPACT Module with Ethernet

SILCL 3 (EN 62061-1)
PL e / Category 4 (EN ISO 13849-1)
16 inputs, 4 outputs, 4 configurable I/O
USB interface
Ethernet interface
Industrial Ethernet protocol (stock no. 871-4609 only)
SD slot for program memory (memory card ordered separately, stock no. 871-4615

SP-PROFIBUS-DP Gateway

Fieldbus protocol PROFIBUS-DP
Bidirectional communication with PLC
Transfer rate 12 MBaud
Transfer of at least 50 bytes of data
Simple configuration with samos® plan

SP-CANopen Gateway

Fieldbus protocol CANopen
Bidirectional communication with PLC
Transfer rate up to 1 MBit/s
Transfer of at least 50 bytes of data
Simple configuration with samos® plan

SP-SDIO Input / Output Module

SILCL 3 (EN 62061-1)
PL e / Category 4 (EN ISO 13849-1)
8 safe inputs
4 safe outputs (with/without output test-pulses)
2 outputs (e.g. test signals)

Specificaties
Kenmerk Waarde
Accessory Type Memory Card
For Use With Samos PRO COMPACT Safety Controller
11 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
8 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
47,55
(excl. BTW)
57,54
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
47,55 €
10 - 14
45,60 €
15 +
43,61 €
Related Products
2 positive opening contacts as standard, on guard ...
Description:
2 positive opening contacts as standard, on guard openingHead rotates in 90° steps giving 8 actuator entry pointsMinimum operating force for positive opening: 15NIngress protection IP671 x cable entry tapped M16 x 1.5 ISO or PG11Actuator needs ordering separately (see ...
The head is secured by tamper-resistant screws and ...
Description:
The head is secured by tamper-resistant screws and can be rotated allowing 8 possible actuator entry positions including front and end entryForced guided contacts - complies with EN 1088, IEC 947-5-1Painted die cast zinc bodyContacts break actuation travel; 6mmOperating temperature; ...
Installation and operation of this safety device must ...
Description:
Installation and operation of this safety device must be in strict accordance with accompanying operating instructions. 14mm resolution (finger detection)DIP switch selectable modes of operation located beneath a security door in the end caps offer features that include:Fixed blanking (teachable)Floating ...
Long life - up to 1 million mechanical ...
Description:
Long life - up to 1 million mechanical operationsDouble insulated3 cable entries M20 x 1.5Large wiring compartmentHigh level of contact reliability with low voltages and currentsPatented roller system - not sensitive to dirty conditionsSlotted holes for adjustment, circular holes for ...