Omron G9SR-AD 24 V dc Safety Relay Dual Channel With 2 Safety Contacts

  • RS-stocknr. 860-3770
  • Fabrikantnummer G9SR-AD201-RC
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: NL
Productomschrijving

Omron G9SR Configurable Safety Relay

The three models of the Omron G9SR safety relays cover virtually all common control system safety requirements in standalone applications. They feature front-panel DIP switches for fast, easy configuration and customization, together with LED indicators for quick status monitoring and fault diagnosis.
The key characteristics of the G9SR include certification to category PLe in line with EN/ISO 13849-1, fast response time to ensure minimum stopping times, solid-state outputs for long-life wear-free operation, compact housings to save space in control panels and removable spring-type terminals to ensure rapid straightforward installation. All units are equipped with an additional monitoring output to provide diagnostic information for use by the standard control system.

G9SR Series Basic Unit.

The G9SR Basic Unit is just 17.5 mm wide and has single or double channel safety inputs, plus double channel solid state safety outputs. The outputs are rated at 2A, which makes them suitable for direct switching of even large contactors.

Features and Benefits.

Compatible for a variety of safety solutions like E-Stop, guard monitoring devices, light curtains and others
Fast response time for short safety distance
Semiconductor outputs for wear-free operation
DIP-switch configurable for fast setup/customized function
Removable spring-type terminals for fast installation
Certified to PLe category (EN/ISO 13849-1) standards Basic Unit Stock number 8603773. 2P ch MOSFET.

G9SR Series Advanced Unit.

The G9SR Advanced Unit is 22.5 mm wide and has single or double channel safety inputs, plus double channel safety relay outputs rated at 5 A. For applications where input expansion is needed, each advanced unit can control up to two G9SR basic units that are configured as additional safety inputs to the same safety function.

Features and Benefits.

Compatible for a variety of safety solutions like E-Stop, guard monitoring devices, light curtains and others
Safety relay outputs with 5A loading
DIP-switch configurable for fast setup/customized function
Removable spring-type terminals for fast installation
Control centre for input/output extension modules
Certified to PLe category (EN ISO 13849-1) standard Advanced units stock number 8603770. 2 PST-NO (normally open)

G9SR Series Extension Unit.

The G9SR Extension Unit is 22.5 mm wide and has three safety relay outputs rated at 5 A. These outputs can be configured for instantaneous operation or to provide independent safe on and off delay timers that can be set in sixteen steps to give a maximum delay of 90 seconds. Up to three G9SR output expansion units can be connected to an advanced unit to provide one instantaneous safety output on the advanced module plus three time controlled safety outputs on the extension units.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Number of Channels 2
Function Emergency Stop, Light Beam/Curtain, Safety Switch/Interlock
Safety Contacts 2
Terminal Type Cage Clamp
Width 99mm
Length 114.5mm
Depth 22.5mm
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
3 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
148,28
(excl. BTW)
179,42
(incl. BTW)
Aantal stuks
Per stuk
1 +
148,28 €
Related Products
The DILAS safety relay, available in three different ...
Description:
The DILAS safety relay, available in three different coil voltages, rounds out Eaton’s product range in this area. The following drive options are available: 110V 50Hz, 120V 60Hz, 230V 50Hz, 240V 60Hz, 24VDC (RDC24). The contactor’s yellow cover allows for ...
The SIRIUS 3TK28 5 safety relay combines solid-state ...
Description:
The SIRIUS 3TK28 5 safety relay combines solid-state safety functionality and two redundant contacting auxiliary contactors. These safety relays/contactors are supplied ready assembled, wired, tested and certified as a single unit. Available with spring-loaded or screw terminals. Enabling circuits, ...
Stop-Category 0 acc. EN 60204-1Applications up to Category ...
Description:
Stop-Category 0 acc. EN 60204-1Applications up to Category 4 acc. EN 954-1, to SIL 3 according to EN62061 and PL e according to EN13849-1Can be used as emergency stop and safety gate monitorManual reset with self-monitoring on each ON-OFF cycleCross ...
LED indication for supply voltage and safety circuitsAutomatic ...
Description:
LED indication for supply voltage and safety circuitsAutomatic restart function availableContact current rating: 6A Conform to BS EN 60204 Part 1 1993; EN 954-1; IEC 204-1; VDE 0113 Dimensions (mm): H 96.5, W 22.5, L 114.