TE Connectivity, AMPLIMITE Blank Slide Lock

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

AMPLIMITE D-Sub Connector Latching Blocks, Locking Posts, Keying Plugs, Gasket and Bushings

Accessories for AMPLIMITE series HDE, HDF, HDP and HD series d-sub connectors including locking post assemblies, latching blocks, and spring latches.
Stock number 680-9235 is a Keying Plug for use with size 20 sockets
Stock number 450-9365 is a 4-40 threaded Locking Post assembly
Stock number 717-4656 is a front panel Latching Block with M3 threaded hole
Stock number 450-9371 is a rear panel Latching Block with 4-40 threaded hole
Stock number 717-4634 is a front panel Latching Block with slot recess and through hole
Stock number 680-9392 is a rear panel Latching Block with slot recess and through hole
Stock number 450-9321 is a 2 piece Spring Latch
Stock number 717-4644 is an EMI RF Gasket, shell size 1
Stock number 782-9940 is a 4-40 threaded locking post kit
Stock number 782-1191 is a Slide Latch Clip with a 4-40 thread size for unfiltered mating half
Stock number 795-2292 is a set of 2 aluminium Stand-off Bushings with a 4-40 thread size
Stock number 798-1482 is a kit of 2 Latching Blocks with a 3 mm (0.12 inch) diameter through hole
Stock number 798-1498 is a plain Flat Washer size #4 (.219 and .125 inch diameters by .032 inch thick), Steel - Zinc plated clear chromate coating.
Stock number 822-5027 is a cord guard for 9 way AMPLIMITE plug or receptacle housings

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Accessory Type Blank
For Use With Slide Lock
Series AMPLIMITE
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 05/02/2021, met een levertijd van 2 à 3 werkdagen.
Prijs Each
3,05
(excl. BTW)
3,69
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
3,05 €
10 - 24
2,94 €
25 - 49
2,56 €
50 - 149
2,43 €
150 +
2,31 €
Related Products
A range of Heavy Duty Sealed Connector Series ...
Description:
A range of Heavy Duty Sealed Connector Series (HDSCS) plug style housings for use in the automotive industry. The HDSCS range uses the MCP 2.8 tabs as a contact system. These HDSCS connectors have integral secondary locking, various polarization keyings, ...
These adjustable guides are suitable for use with ...
Description:
These adjustable guides are suitable for use with the extension rods and handles in the 3 point locking system range. Used to support rods RS stock nos. 348-7084 & 348-7090Unplated steel bracket suitable for weldingPolyamide slide with zinc plated steel ...
UL94V-0 rated backshell and latches providing secure connector ...
Description:
UL94V-0 rated backshell and latches providing secure connector coupling but, can be disengaged by pressing the sidesIncludes a slide and spring, which when assembled will push-lock with latches (available separately) fitted either to equipment or other backshells in this range ...
Description:
A range of top and side entry spring or slide locking d-sub connector hoods or backshells made from thermoplastic or metallized thermoplastic.Part numbers 0967xxx0511 are grey thermoplastic backshells with a side cable entryPart numbers 0967xxx0411 are grey thermoplastic backshells with ...