Top/Bottom Cover for use with 19-Inch Rack

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TH
Productomschrijving

Wall Mount Open Frame Cabinet

This wall mount open frame cabinet is the ideal solution for small cable and patch panel installations. The cabinets open frame and hinged front mounting angle allow for maximum access which means simple and fast installation.

Features:

Simple and fast installation
Available in three heights, 2U, 4U and 6U
Made from heavy duty steel
Ample cable access openings at rear and side
Large cut out at rear panel fits over wall power points
Numerous cable tie off points provided

Open frame cabinet

1 x welded frame complete with a hinged mounting panel on one side, 1 x detachable mounting panel, 2 x Philips Pan Head screws (M5x10, black)

Top/bottom cover (Sold Separately)

1 x top/bottom cover (can be used for either), 4 x Philips Pan Head screws (M5x10, black) - 7450746

Note

For higher levels of security or environmental protection, an optional cover and base panel are available separately.

Standards

Conforms to EIA310-E.

Specificaties
Kenmerk Waarde
Type Top/Bottom Cover
For Use With 19-Inch Rack
22 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
19,16
(excl. BTW)
23,18
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
19,16 €
10 - 14
18,55 €
15 +
17,93 €
Related Products
The RS PRO cage nut installer kit is ...
Description:
The RS PRO cage nut installer kit is a robust set of tools and fixings ideal for installing 19 inch rack mounted equipment within the data communication industry. This versatile kit includes a range of nuts, washers, screws and cable ...
These components are for the easy-to-assemble KM6-II sub-rack ...
Description:
These components are for the easy-to-assemble KM6-II sub-rack system which meet the requirements of IEC297-3 and are ideal for applications where external vibration is a factor to be considered. They feature an 84HP (426mm) total useable width. Kits for EMC ...
Including main door latch for safety locking of ...
Description:
Including main door latch for safety locking of enclosures and bayed enclosure suites. Tested in conjunction with actuator lever for master switch. May be mounted optionally on the left or right of the enclosure. With this cover, all single-door bayed ...
Remarks:. Cupboard to accommodate 19" components with maximum ...
Description:
Remarks:. Cupboard to accommodate 19" components with maximum load bearing of 200 kgMain areas of use: testing areas, laboratories and officesDust and water protection: IP20 in accordance with IEC/EN 60529Cupboard width 553 mm, depth of either 500 mm or 600 ...