TE Connectivity, AMPLIMITE Blank

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

AMPLIMITE D-Sub Crimp Ferrules for Braided Cable Shield

A range of AMPLIMITE crimp ferrules for use with braided cable shield on shielded cable clamps or backshells. These ferrules are available as tin plated brass inner ferrules, tin plated copper ferrules or aluminium split ring ferrules, please refer to table for details. The split ring ferrules are suitable for both foil and braided cable and cannot be used with outer and inner ferrules.

Note

For inner and outer ferrules the minimum O.D. is 1.27mm smaller than the maximum O.D. At the maximum cable O.D. the minimum insulation thickness is 4.52mm.
For split-ring ferrules the minimum O.D. is 1.02mm smaller than the maximum O.D.

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Accessory Type Blank
Series AMPLIMITE
265 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
1,338
(excl. BTW)
1,619
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 120
1,338 €
6,69 €
125 - 370
1,034 €
5,17 €
375 - 995
0,938 €
4,69 €
1000 - 1995
0,732 €
3,66 €
2000 +
0,696 €
3,48 €
*prijsindicatie
Verpakkingsopties
Related Products
These Shielded D-Sub Right Angle Adaptors convert Pins ...
Description:
These Shielded D-Sub Right Angle Adaptors convert Pins to Sockets . The design of these Shielded D-Sub Right Angle Adaptors features brass nickel plated 4-40UNC mounting screws on the pin connector face and steel tin plated female 4-40UNC screw locks ...
IP67 SEAL-D connector caps which meet IEC-529-IP67 requirements. ...
Description:
IP67 SEAL-D connector caps which meet IEC-529-IP67 requirements. These SEAL-D IP67 connector caps are suitable for use with the NorComp SEAL-D D-Sub connectors and existing industry standard IP67 connectors. These IP67 covers consist of an ABS backshell, silicone bushing and ...
Stainless steel screwlock kits (2 screwlocks per kit) ...
Description:
Stainless steel screwlock kits (2 screwlocks per kit) for AMPLIMITE .050 series d-sub PCB right angle and vertical mount receptacle headers and panel mount plug and receptacle headers. For thread size and length please refer to table.Stock number 717-4511 is ...
AMPLIMITE HDP-20 series, unassembled shielded d-sub connector Plug ...
Description:
AMPLIMITE HDP-20 series, unassembled shielded d-sub connector Plug and Receptacle kits consisting of a d-sub connector with a full metal tin over copper plated steel shell and black polyester GF nylon insert preloaded with gold flash plated contacts, 2 x ...