Mitsubishi PLC Expansion Module 5 V dc 46.1 x 19.6 x 53.5 mm

  • RS-stocknr. 539-0897
  • Fabrikantnummer FX3U-USB-BD
  • Fabrikant Mitsubishi
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: JP
Productomschrijving

Communication Modules

Six communication modules for use with FX3U PLCs. The ADP modules fit on to the left hand side of the base unit while the BD modules clip into the front left corner of the base unit. The RS232 interfaces can be used for applications such as communication with a PC, printer or bar code reader while the RS422 interfaces provide a second programming port which enables an operator panel (HMI) and a programming PC to be connected at the same time. The RS 485 interfaces allow networking of FX PLCs and a simple way of connecting to Mitsubishi inverter drives using the built-in protocol instructions. The USB BD module offers connectivity to PCs via USB for programming purposes.

Note

The ADP modules fit on the left-hand side of FX3U base units and require one of the following modules to connect to the PLC: FX3U-232-BD (539-0869), FX3U-422-BD (539-0875), FX3U-485-BD (539-0881), FX3U-USB-BD (539-0897), FX3U-CNV-BD (539-0904)
A maximum of two ADP communications modules or one ADP and one BD communications modules can be fitted at any one time to a base unit. Supply voltage is taken from PLC base unit.

Mitsubishi FX3U

FX3U CPU's are compatible with existing FX2N expansion modules as well as the new FX3U ADP expansion modules and may be used as a replacement for FX2N PLC's.

Specificaties
Kenmerk Waarde
For Use With FX3U Series
Voltage Category 5 V dc
Length 46.1mm
Width 19.6mm
Depth 53.5mm
Dimensions 46.1 x 19.6 x 53.5 mm
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
157,95
(excl. BTW)
191,12
(incl. BTW)
Aantal stuks
Per stuk
1 +
157,95 €
Related Products
Serial Communication Modules supporting Host Link, No-protocol, NT ...
Description:
Serial Communication Modules supporting Host Link, No-protocol, NT Link (1:N), Serial PLC Link, Serial Gateway (CompoWay/F master, Modbus-RTU master) and Modbus-RTU easy master functions. CP1W-CIF01 RS-232C module (stock no. 401-484) and CP1W-CIF11 RS-422A/485 (401-478) may be used with either CP1L ...
Omron's CP1L series offers the compactness of a ...
Description:
Omron's CP1L series offers the compactness of a micro-PLC with the capability of a modular PLC. The range is not only compact, it is scaleable too, and has a faster processing speed than other controllers. Max. switching capacity: 0.3A/point @ ...
The Crouzet signal converter module is designed to ...
Description:
The Crouzet signal converter module is designed to use with Millenium 3 and Millenium II+ series. It has input signals 0-20mA current or PWM. It has an output signal of 0-10Vdc rating.Crouzet Millenium 3:The Millenium 3 is the latest generation ...
The Millenium 3 is the latest generation in ...
Description:
The Millenium 3 is the latest generation in the Millenium series. Improvements over the Millenium 2 Plus include:. Modbus RS-485 Slave Communication Extension- 8 WordsExchange of input/output state or of internal values via communication networksPower supply via the controller.