Mitsubishi Base for use with FX3 Series

  • RS-stocknr. 539-0869
  • Fabrikantnummer FX3U-232-BD
  • Fabrikant Mitsubishi
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: JP
Productomschrijving

Communication Modules

Six communication modules for use with FX3U PLCs. The ADP modules fit on to the left hand side of the base unit while the BD modules clip into the front left corner of the base unit. The RS232 interfaces can be used for applications such as communication with a PC, printer or bar code reader while the RS422 interfaces provide a second programming port which enables an operator panel (HMI) and a programming PC to be connected at the same time. The RS 485 interfaces allow networking of FX PLCs and a simple way of connecting to Mitsubishi inverter drives using the built-in protocol instructions. The USB BD module offers connectivity to PCs via USB for programming purposes.

Note

The ADP modules fit on the left-hand side of FX3U base units and require one of the following modules to connect to the PLC: FX3U-232-BD (539-0869), FX3U-422-BD (539-0875), FX3U-485-BD (539-0881), FX3U-USB-BD (539-0897), FX3U-CNV-BD (539-0904)
A maximum of two ADP communications modules or one ADP and one BD communications modules can be fitted at any one time to a base unit. Supply voltage is taken from PLC base unit.

Mitsubishi FX3U

FX3U CPU's are compatible with existing FX2N expansion modules as well as the new FX3U ADP expansion modules and may be used as a replacement for FX2N PLC's.

Specificaties
Kenmerk Waarde
Accessory Type Base
For Use With FX3 Series
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
157,95
(excl. BTW)
191,12
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
157,95 €
5 - 9
151,63 €
10 +
146,90 €
Related Products
ABE7CPA410 (147-578) for connection on a screw terminal ...
Description:
ABE7CPA410 (147-578) for connection on a screw terminal block of 4 current/voltage inputs of the BMXAMI0410 (147-988) analogue module, with supply of 4 isolated protected power supplies for the current loop inputs.,ABE7CPA412 (147-584) for connection on a screw terminal block ...
The Siemens memory card is used for enhancing ...
Description:
The Siemens memory card is used for enhancing ROM memory in S7-300/C7/ET 200 PLCs. Type of memory is Flash EPROMMemory size is 8MbMinimum 100000 write/delete operations are possibleData retention (after final programming action) for minimum 10 years.
Pre-wired system enabling connection and adaptation of control ...
Description:
Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors. Plug & play solution8, 12,16 channel modularity1, 2, 3 wire connectionLED state display55mm width sub-baseVoltage and power adaptationCommon polarities distributionSolid state and electromechanical ...
The Omron Electronic lithium battery has an output ...
Description:
The Omron Electronic lithium battery has an output voltage of 3V and 850mAh capacity. It has a wire leads connector. This product can be used with SYSMAC CJ series CPU units. ANSI/ESD S20.20:2014BSEN 61340-5-1:2007.