1.105 x 0.69 x 0.35in Terminal Cover for use with 6 VA Transformer

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Chassis Mount Clamp & Frame Construction 115/230Vac Primary Transformer Accessories

Approvals

8888

Standards

BS3535; EN 60 742

Open Laminated Clamp & Frame 115-230Vac Primary 6VA to 100VA

Chassis mounting mains transformers with twin 115Va.c. 50/60Hz primary windings which may be connected in series for 230V or parallel for 115V operation. The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options.

Specificaties
Kenmerk Waarde
For Use With 6 VA Transformer
Dimensions 1.105 x 0.69 x 0.35in
Depth 0.35in
Length 1.105in
Width 0.69in
Accessory Type Shroud
Material Glass Reinforced Nylon
236 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2663 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
1,39
(excl. BTW)
1,68
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
1,39 €
10 - 24
0,43 €
25 - 49
0,33 €
50 - 99
0,23 €
100 +
0,19 €
Related Products
Autowound transformers for step-up or step-down of mains ...
Description:
Autowound transformers for step-up or step-down of mains voltages at 50/60Hz. , Compact construction Full varnish impregnation Fully shrouded Four-hole fixing for permanent installation Terminal blocks with protective covers (except 50VA which has leads) 100% electrical and flash tested (2kV ...
Single-phase control and signalling transformers (50 → 60 ...
Description:
Single-phase control and signalling transformers (50 → 60 Hz - class 1).Active parts protected by cover up to 1000 VA.Mounting on full or perforated platinum, or rail according to power.Direct mounting possible on symmetrical DIN rail up to 250 VA.More ...
IP20 rated independent transformer for 12V halogen lamps. ...
Description:
IP20 rated independent transformer for 12V halogen lamps. Class II protection against electric shock following direct and indirect contactVery compact sizeSupplied with terminal cover and cable retainerInlet and outlet terminals are on the same side (2.5 mm² terminal area)Clamping screws ...
SMD B78304 series DC to DC converters with ...
Description:
SMD B78304 series DC to DC converters with an E 6.3 ferrite core, cover cap and 6 gullwing terminals. These DC to DC transformers have a low stray inductance, low winding capacitance and low DC resistance. Typical applications for these ...