3M Latch for use with 4600 Series

  • RS-stocknr. 483-4431
  • Fabrikantnummer 3505-16
  • Fabrikant 3M
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

3M 2.54 x 2.54mm 4600 Series Cable Mount IDC Plugs

2.54 x 2.54mm 4600 series cable mount IDC plugs for use with flat ribbon cable or discrete wire with a wire size range of 26 and 28 AWG (solid and stranded). These 4600 series 2.54mm cable mount IDC plug connectors have a shrouded design for pin protection and open end covers that enable daisy chaining and bussing. Various polarization options are available for these 2.54mm 4600 series IDC ribbon cable plugs, please refer to datasheet on our website for details.
Part numbers 46XX-XXX0 have slotted mounting flanges.
Part numbers 46XX-X2X0 are supplied with short ejector latches
Part numbers 46XX-X3X0 are supplied withlong ejector latches
Ejector latches are also available separately (non-flanged versions only) see stock nos. 483-4431 (short) and 483-4447 (long)
For polarising key see stock number 629-0029
Strain reliefs are also available see stock number 838-1492 typically.

Note

See 3M IDC ribbon cable – typically stock no.120-8413. Dedicated tooling is also available – see stock no. 120-6962 and range.

Specificaties
Kenmerk Waarde
Accessory Type Latch
For Use With 4600 Series
27 op voorraad - levertijd is 1 werkdag(en)
Prijs 1 Bag of 10
4,75
(excl. BTW)
5,75
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 - 24
4,75 €
0,475 €
25 - 99
3,33 €
0,333 €
100 - 249
3,16 €
0,316 €
250 - 499
3,08 €
0,308 €
500 +
3,00 €
0,30 €
*prijsindicatie
Related Products
The MM60 series is a module socket compatible ...
Description:
The MM60 series is a module socket compatible to specifications standardized in the PCI-SIG. Compatible to PCI Express Mini Card Electromechanical SPECAvailable with fixing latch for the whole connector and moduleLatch has an operating portion on both ends for module ...
EXTreme Ten60Power TPA (Terminal Position Assurance) for use ...
Description:
EXTreme Ten60Power TPA (Terminal Position Assurance) for use with the 172510 series and 172512 crimp receptacle housings. This TPA retainer ensures that the contacts are firmly inserted into the receptacle housing and prevents contact back-out due to vibration.
EP 2.5 TPA (Terminal Position Assurance) retainers for ...
Description:
EP 2.5 TPA (Terminal Position Assurance) retainers for use with EP TPA receptacle housings. These TPA retainers ensure that the contacts are fully inserted into the housing and prevent them from backing out due to vibration. A locking latch on ...
DF 22 series connector retainer clips are utilised ...
Description:
DF 22 series connector retainer clips are utilised to offer wire retention assistance to the DF 22 series of standard height with standard lock (DF22 part numbers) , and also long type standard lock and long type ergonomic lock (DF22B/C ...