TE Connectivity, AMPLIMITE Blank 9 → 37 Way D-sub Connec→r

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

AMPLIMITE D-Sub Connector Latching Blocks, Locking Posts, Keying Plugs, Gasket and Bushings

Accessories for AMPLIMITE series HDE, HDF, HDP and HD series d-sub connectors including locking post assemblies, latching blocks, and spring latches.
Stock number 680-9235 is a Keying Plug for use with size 20 sockets
Stock number 450-9365 is a 4-40 threaded Locking Post assembly
Stock number 717-4656 is a front panel Latching Block with M3 threaded hole
Stock number 450-9371 is a rear panel Latching Block with 4-40 threaded hole
Stock number 717-4634 is a front panel Latching Block with slot recess and through hole
Stock number 680-9392 is a rear panel Latching Block with slot recess and through hole
Stock number 450-9321 is a 2 piece Spring Latch
Stock number 717-4644 is an EMI RF Gasket, shell size 1
Stock number 782-9940 is a 4-40 threaded locking post kit
Stock number 782-1191 is a Slide Latch Clip with a 4-40 thread size for unfiltered mating half
Stock number 795-2292 is a set of 2 aluminium Stand-off Bushings with a 4-40 thread size
Stock number 798-1482 is a kit of 2 Latching Blocks with a 3 mm (0.12 inch) diameter through hole
Stock number 798-1498 is a plain Flat Washer size #4 (.219 and .125 inch diameters by .032 inch thick), Steel - Zinc plated clear chromate coating.
Stock number 822-5027 is a cord guard for 9 way AMPLIMITE plug or receptacle housings

//media.rs-online.com/t_line/L270988-01.gif
//media.rs-online.com/t_line/L450920-01.gif
//media.rs-online.com/t_line/L450936-01.gif

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Accessory Type Blank
For Use With 9 → 37 Way D-sub Connec→r
Series AMPLIMITE
24 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
3,18
(excl. BTW)
3,85
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
3,18 €
10 - 24
2,71 €
25 - 49
2,39 €
50 - 99
2,07 €
100 +
1,90 €
Related Products
A range of accessories for D-Subminiature Connectors. The ...
Description:
A range of accessories for D-Subminiature Connectors. The female fastenings can accommodate all mounting systems with screw thread size 4-40 UNC 2 B.The male fastenings can be used with hoods that do not have fixing screws.
AMPLIMITE strain relief or cable stabalizer for use ...
Description:
AMPLIMITE strain relief or cable stabalizer for use with the HDF-20 series d-sub connectors for flat ribbon cable. These HDF-20 strain reliefs are made from black thermoplastic with a 90° cable exit.
A range of male screw retainer kits for ...
Description:
A range of male screw retainer kits for use with AMPLIMITE d-sub connectors. These AMPLIMITE screw retainers are available with a variety of thread sizes and thread lengths, please see table for details.Screw retainer kits consist of 2 x screws ...
A range of individual screwlocks and screwlock kits ...
Description:
A range of individual screwlocks and screwlock kits for use with AMPLIMITE D-sub connectors. These AMPLIMITE screwlocks are available with a variety of thread sizes and thread lengths, please see table for details.Screwlocks are available individually or as kits. Screwlock ...