TE Connectivity Connector Latch AMPLIMITE" Series Spring Latch" , For use with 9 → 37 Way D-sub Connector

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

AMPLIMITE D-Sub Connector Latching Blocks, Locking Posts, Keying Plugs, Gasket and Bushings

Accessories for AMPLIMITE series HDE, HDF, HDP and HD series d-sub connectors including locking post assemblies, latching blocks, and spring latches.
Stock number 680-9235 is a Keying Plug for use with size 20 sockets
Stock number 450-9365 is a 4-40 threaded Locking Post assembly
Stock number 717-4656 is a front panel Latching Block with M3 threaded hole
Stock number 450-9371 is a rear panel Latching Block with 4-40 threaded hole
Stock number 717-4634 is a front panel Latching Block with slot recess and through hole
Stock number 680-9392 is a rear panel Latching Block with slot recess and through hole
Stock number 450-9321 is a 2 piece Spring Latch
Stock number 717-4644 is an EMI RF Gasket, shell size 1
Stock number 782-9940 is a 4-40 threaded locking post kit
Stock number 782-1191 is a Slide Latch Clip with a 4-40 thread size for unfiltered mating half
Stock number 795-2292 is a set of 2 aluminium Stand-off Bushings with a 4-40 thread size
Stock number 798-1482 is a kit of 2 Latching Blocks with a 3 mm (0.12 inch) diameter through hole
Stock number 798-1498 is a plain Flat Washer size #4 (.219 and .125 inch diameters by .032 inch thick), Steel - Zinc plated clear chromate coating.
Stock number 822-5027 is a cord guard for 9 way AMPLIMITE plug or receptacle housings

//media.rs-online.com/t_line/L270988-01.gif
//media.rs-online.com/t_line/L450920-01.gif
//media.rs-online.com/t_line/L450936-01.gif

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Accessory Type Blank
For Use With 9 → 37 Way D-sub Connec→r
Series AMPLIMITE
320 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
922 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
1,51
(excl. BTW)
1,83
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
1,51 €
25 - 74
1,29 €
75 - 199
1,22 €
200 - 399
1,16 €
400 +
1,10 €
Related Products
Straight exit, two-piece unassembled backshells or cable clamp ...
Description:
Straight exit, two-piece unassembled backshells or cable clamp kits made from black ABS with 2 x zinc plated steel 4-40 fillister head screws, 2 x hex nuts and 2 x 4-40 mounting screws. These straight exit, two-piece AMPLIMITE backshells are ...
A range of Quick Lock pin sets for ...
Description:
A range of Quick Lock pin sets for use with TE Connectivity Quick Lock full metal D-Sub miniature hoods. The variant B kits contain stainless steel latch pins, a disc washer and spring washer. The Quick Lock pin sets are ...
Quick Lock Pin set for use with TE ...
Description:
Quick Lock Pin set for use with TE Connectivity Quick Lock full metal D-Sub miniature back shells. The C variant kits contain M3 threaded latch pins, stainless steel spring and disc washers and M3 nuts. Quick Lock pins are mounted ...
Stainless steel screwlock kits (2 screwlocks per kit) ...
Description:
Stainless steel screwlock kits (2 screwlocks per kit) for AMPLIMITE .050 series d-sub PCB right angle and vertical mount receptacle headers and panel mount plug and receptacle headers. For thread size and length please refer to table.Stock number 717-4511 is ...