Fluke TL224 Silicone Test Lead Set, CAT III 1000 V, CAT IV 600 V

  • RS-stocknr. 450-2358
  • Fabrikantnummer TL224
  • Fabrikant Fluke
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: US
Productomschrijving

Fluke Multimeter Test Leads and Probes

Brought to you by Fluke, a range of test leads and probes suitable exclusively for Fluke Multimeters. Whether it's a test lead set or a probe set, dependent on the application, both types will add a sense of reliability to the intended application. All models are highly reliable and excellent quality.

Features and Benefits

• Various series, including TL910, TL224 and 80BK (probe)
• Durable connection, which guarantees excellent results
• Single accessories and kits
• Different safety categories to suit the application
• Insulated wires

What are test leads?

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

What are test probes?

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.

Specificaties
Kenmerk Waarde
Lead Type Silicone Test Lead Set
Connector Type Banana Plug
Lead Length 1.5m
Current Rating 10A
Safety Category Voltage 600 V, 1000 V
Safety Category CAT III 1000 V, CAT IV 600 V
Safety Category Level CAT III, CAT IV
35 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
119 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
34,00
(excl. BTW)
41,14
(incl. BTW)
Aantal stuks
Per stuk
1 +
34,00 €
Related Products
Rugged current clamp adaptor suitable for use with ...
Description:
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.d.c. current zero ...
Rugged current clamp adaptor suitable for use with ...
Description:
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.d.c. current zero ...
RS Pro Back red & black right angled ...
Description:
RS Pro Back red & black right angled back probe enables measurement in confined areas. The attached silicone lead with socket allows connection with any standard 4 mm plug. 2 Colour (Black & Red)0.7 (0.028") O.D. Back Probe PinsLength: 300 ...
Our lead sets are usually supplied packed in ...
Description:
Our lead sets are usually supplied packed in a plastic wallet. All 4mm plugs are shrouded and touchproof. We have three kinds of standard, double-insulated cable, rated 1KV (PVC), 5KV and 12KV (silicone). Available in black, red, green, blue, brown ...