IP56 Rated DIN Mounting Stem for use with DIN & Flexi DIN Beacons

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

RS PRO Xenon Beacons

These Xenon Beacons from our own RS PRO brand are high quality flashing beacons ideal for use in wide range of applications requiring a low cost and energy efficient signalling solution. The snap fit design of the mounting plates allows you to install the xenon beacons with ease, with one plate being attached to the beacon and the other to the surface. This range of flashing beacons from RS PRO are suitable for light and heavy industrial signalling applications, producing a powerful flashing light source to signal hazards and emergencies.

Features and benefits

• Quick and easy installation
• Available in red or amber
• Suitable for a range of signalling applications
• Powerful flashing signal light
• Snap fit mounting plate design
• IP56 rating offering protection from dust and water ingress
• Ideal for use both indoors and outdoors
• Nominal flash rate: 75 per minute

Application

Xenon beacons are an excellent low cost and energy efficient signalling solution ideal for use in industrial applications. They are available in a variety of sizes and colours, most commonly red, amber and green and emit a powerful flashing light that can be used to signal emergencies, hazards and more. xenon beacons are used in a variety of industrial applications with high levels of ambient noise such as:

• Warehouses
• Factories
• Machinery
• Vehicles
• Walkways
• Emergency exits

RS PRO

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Note

DIN or Flexi DIN beacons can only be mounted using the DIN mounting stem, which is available separately (stock no. 235-613).

Approvals

EMC - meets the requirements for on and off-road applications covered by directives 95/54 and 89/336.

Supplied with

Lens and bulb

Warning

  • Disconnect and leave for 5 minutes before touching.
Specificaties
Kenmerk Waarde
For Use With DIN & Flexi DIN Beacons
Accessory Type DIN Mounting Stem
IP Rating IP56
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
47 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
15,51
(excl. BTW)
18,77
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
15,51 €
10 - 14
15,05 €
15 +
14,43 €
Related Products
Simple mounting using the fixing brackets (sold separately)Fixing ...
Description:
Simple mounting using the fixing brackets (sold separately)Fixing brackets will mount up to 3 beacons in sequenceVarious adhesive stickers (sold separately) for marking indication on the beacon lensTwin bulb version for enhanced safety in the event of single bulb failureSingle ...
The Werma Signal Technik mini adaptor is the ...
Description:
The Werma Signal Technik mini adaptor is the new modular, simple and clear standard solution for thesignalling sector. The materials used for housing are PC/ABS. It is RoHS compliant. Operating temperature is from -30°C to +60°CType 12 UL Rating Pollution ...
The Werma Signal Technik mini adaptor is the ...
Description:
The Werma Signal Technik mini adaptor is the new modular, simple and clear standard solution for thesignalling sector. The materials used for housing are PC/ABS. It is RoHS compliant. Operating temperature is from -30°C to +60°CType 12 UL Rating Pollution ...
The Werma Signal Technik mini adaptor is the ...
Description:
The Werma Signal Technik mini adaptor is the new modular, simple and clear standard solution for thesignalling sector. The materials used for housing are PC/ABS. It is RoHS compliant. Operating temperature is from -30°C to +60°CScrewed cable gland cable entryPollution ...