RS PRO Electronic DC Load 0 30 A 230 V 300 W, 0.05 7.5 kΩ

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

RS PRO Single Channel Electronic Load, 0-120V, 0-30A, 300W

Introducing the RS-KEL103 single channel electronic load from RS PRO, a highly reliable device ideal for testing a range of power supplies, ensuring they meet standard safety and compliance standards. This durable electronic load from RS PRO features 4 working modes CV (constant voltage), CC (constant current), CR (constant resistance), CW (continuous wave), making it ideal for general purpose measurement on a range of power supplies. The RS-KEL103, offers flexibility when testing and loading power sources, allowing to sink various levels of power profiles in the multiple modes. This reliable device also features a short circuit function, which is ideal for power and automated testing. The RS-KEL103 load features a clear and user friendly interface, allowing you to clearly navigate the device with USB, RS232 & LAN capabilities.

Features and benefits

0-120V, 0-30A, 300W Dynamic mode: up to 10KHZ Resolution of voltage and current: 0.1mV/0.1mA 4 working modes: CV/CC/CR/CW Remote sensing function Battery test, automatic test, OPP test, OCP test functions 100 sets of storage Short circuit function Power off memory function Interfaces: USB, RS232 & LAN

Application

Electronic loads are a type of electronic power testing instrument used in a wide range of applications where the test and measurement of a power supply is required. These programmable devices are essential in ensuring various power supplies meet the required safety and compliance standards. Electronic loads offer various modes of control such as constant voltage, constant current, constant power, and constant resistance making them highly versatile and powerful instruments. They are commonly used in areas such as: Aerospace Laboratory Car battery manufacturers Fuel-cell manufacturers Cell-phone manufacturers Solar panel manufacturers

What is the Voltage Measurement range?

0-18V / 0-120V

What is the Current Measurement range?

0-3A / 0-30A

What is the Power Measurement range?

300W

Why use an electronic load rather than a fixed value power resistor?

A fixed value power resistor is suitable for applications that require no closed loop control, however, they can present many limitations when testing power sources. Electronic loads have the ability to emulate various scenarios and actual devices that connect to your power source, whilst providing higher flexibility by allowing you to sink various levels of power and arbitrary profiles. Electronic loads reduce test time and cost by easily adapting to continuous changes in device test requirements, making them a highly effective solution to test power devices.

Specificaties
Kenmerk Waarde
Constant Wattage Mode Range 0 300 W
Constant Voltage Mode Range 0 120 V
Constant Current Mode Range 0 30 A
Constant Resistance Mode Range 0.05 7.5 kΩ
Rack Units 386 mm
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 17/04/2020, met een levertijd van 1 werkdag.
Prijs Each
375,70
(excl. BTW)
454,60
(incl. BTW)
Aantal stuks
Per stuk
1 +
375,70 €
Related Products
This series of DC electronic loads provides fast ...
Description:
This series of DC electronic loads provides fast operation and accurate programming & readback for high-volume DC power supply test systems. The N3300A full-rack width mainframe (3.2kg) accepts user-installable Keysight load modules for easy system configuration and future reconfiguration. It ...
The Electronic Load App enables control of electronic ...
Description:
The Electronic Load App enables control of electronic load to set parameters, visualize power output and data log changing voltage, current, and power over time. Combine channels into a single configuration allowing for simpler control of parallel channels. BenchVue Test ...
The T3EL series is a family of single ...
Description:
The T3EL series is a family of single channel, 300 Watt Electronic Loads that are ideal for R&D, product validation and Q&A in a bench or automated environment for low to medium power applications starting from 60mA, such as electronic ...
Input performance of 150 W (SSL-32EL150) or 300 ...
Description:
Input performance of 150 W (SSL-32EL150) or 300 W (SSL-32EL300)Isolated inputON / OFF output switchCurrent or R mode optionRotary transducer or button option for settingsMultifunctional LCD displayMemory for device settings, load profileTable-top device designed for 19" panel mountRS232 or RS485 ...