STMicroelectronics B-LCDAD-HDMI1, MIPI/DSI to HDMI Adapter Board for ST Discovery Kits

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

MIPI DSI Interface TFT LCD Board

The B-LCD40-DSI1 daughterboard is an optional capacitive touchscreen display board that can be used with a Discovery development kit such as the STM32F769I-DISC1. Two interface adapters are also available.

4in TFT LCD touchscreen display panel
Resolution: 480 x 800 pixels (WVGA)
16.7M display colours
RGB vertical stripe of pixel arrangement
MIPI DSI connector
Up to two lanes of MIPI DSI data
Supports single-point touch and gesture or two-point touch
Power supply: +2.8V to +3.3Vdc for both LCD and touch panel, +5V for backlight

Display Interface Adapters
124-1570 B-LCDAD-RPI1 DSI to Raspberry Pi Connector Adapter Board
124-1571 B-LCDAD-HDMI1 DSI to HDMI Connector Adapter Board

The DSI to HDMI adapter board, part number B-LCDAD-HDMI1 is used for STM32 Development Boards or Discovery Boards. It comes with DSI input port and HDMI output port.

What is the benefit of B-LCDAD-HDMI1?

B-LCDAD-HDMI1 includes bridge chip ADV7533, therefore this board can support 2-, 3- or 4-lanes DSI video input data, S/PDIF, 2-channels I2S audio input data and HDMI v1.3 output port.

What is STM32 Development Board?

These boards have been designed for development purposes for the ARM Cortex STM32 MCUs.

STM32 carries external circuity such as transceivers, sensors, memory interfaces, displays and many more and are known as a reference design for application development.

Features of B-LCDAD-HDMI1:

• Up to four lanes of MIPI/DSI data, each running up to 800 Mbps
• 2-channels I2S transmits stereo up to 192 kHz sampling rate
• S/PDIF carries stereo LPCM audio or compressed audio

HDMI output connector:

• Support of video resolutions with pixel clocks up to 80 MHz
• Support of CEC signals, 5 V-tolerant I2C and HPD I/Os
• Common-mode filters with ESD protection

Application:

• Development Design
• Embedded Design

Specificaties
Kenmerk Waarde
For Use With ST Discovery Kits
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
26,04
(excl. BTW)
31,51
(incl. BTW)
Aantal stuks
Per stuk
1 +
26,04 €
Related Products
The B-L475E-IOT01A Discovery kit allows users to develop ...
Description:
The B-L475E-IOT01A Discovery kit allows users to develop applications featuring direct connection of wireless IoT sensors to cloud servers. It is supported by a wide range of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs. • STM32L475VG low-power ...
The JTAG-HS3 programming cable allows high-speed programming/debugging of ...
Description:
The JTAG-HS3 programming cable allows high-speed programming/debugging of Xilinx FPGA and SoC devices from a host PC. • Separate Vref drives JTAG signal voltages• Vref can be any voltage between +1.8V and +5V• USB 2.0 HS port drives JTAG bus ...
The JTAG-HS2 programming cable allows high-speed programming of ...
Description:
The JTAG-HS2 programming cable allows high-speed programming of Xilinx FPGA devices from a host PC. • Compatible with all Xilinx tools• Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)• On-board ADP123AUJZ 300mA voltage regulator• Separate Vref ...
The ISL32705E is a galvanically isolated, full-duplex differential ...
Description:
The ISL32705E is a galvanically isolated, full-duplex differential bus transceiver, designed for bidirectional data transmission meeting the RS-485 and RS-422 standards for balanced communication. All bus terminals are protected against ±7kV ESD strikes without latch-up.The device uses Giant Magnetoresistance ...