Wago, Mounting Adapter, 260, 261, 262 Series

  • RS-stocknr. 101-3877
  • Fabrikantnummer 209-123
  • Fabrikant Wago
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Cage Clamp - 260 Series

Cage clamp® connection terminal blocks with side entry are screwdriver actuated and include fixing flanges at either end of the terminal block. A DIN Rail mounting adapter is also available which screw mounts into the base of the terminal blocks. It is recommended that the maximum distance between adapters is 35-40 mm.

Features and Benefits

• 2 Conductor-through terminal block
• 6 kV surge voltage
101-3877 is a mounting foot with screw for DIN 35 rail

260 Series

Specificaties
Kenmerk Waarde
Accessory Type Mounting Adapter
Series 260, 261, 262
For Use With Terminal Block
260 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1650 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,34
(excl. BTW)
0,41
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
0,34 €
3,40 €
*prijsindicatie
Related Products
A test adaptor which enables DIN rail mounted ...
Description:
A test adaptor which enables DIN rail mounted terminals to accept 4mm test leads. The adaptor screws into the terminal current bar and projects above the terminal to accept both shrouded and unshrouded 4mm plugs.,The test adaptor precludes the use ...
Feed-through terminal blocks with cage clamp® connection. • ...
Description:
Feed-through terminal blocks with cage clamp® connection. • DIN Rail type TS 35• 3 conductors (1 input, 2 outputs)• Quick connection using cage-type springs, not affected by impact and vibration• For rigid, semi-rigid and flexible conductors• Two permissible wire cross-sections, ...
Shielded clamping screw to directly contact shielded wires ...
Description:
Shielded clamping screw to directly contact shielded wires and busbarsTransport rails 1000 mm long, tin-coatedDistancing sleeve prevents buckling while fixing the transport rails (compatible with M5 screws)Insulated holding block for busbars with M4 x 8 mm screen for common shielding ...
Front-entry miniature screwless DIN Rail terminals are designed ...
Description:
Front-entry miniature screwless DIN Rail terminals are designed for snap-mounting onto symmetrical DIN Rail 467-349. The terminals have a clamp design that ensures the clamping force automatically adjusts to the size of the connector. Thus resulting in a corrosion-free contact ...