MikroElektronika Analogue Education - MIKROE-957

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CS
Productomschrijving

Analogue System Lab Kit PRO

ASLK PRO is an educational tool designed to support undergraduate engineering courses in basic analogue electronics. ASLK PRO is a cost efficient platform or test bed for students to realize almost any analogue system using general purpose integrated circuits such as operational amplifiers and analogue multipliers together with discrete devices (transistors and diodes).

3 x general-purpose TL082 operational amplifiers
3 x wide-bandwidth precision MPY634 analogue multipliers
2 x 12-bit DAC7821 parallel-input multiplying Digital-to-Analogue converters
Wide-input TPS40200 non-synchronous buck DC/DC controller
Low-dropout regulator TPS7250
BJT transistor, FET transistor, 2 x diodes
General-purpose prototyping area
Screw terminals to connect ±10Vdc power supply

Note

The following software will be needed to carry out the experiments suggested in the ASLK PRO manual:
1. TINA or PSpice or any powerful simulator based on the SPICE Simulation Engine
2. FilterPro - Software for designing analogue filters
3. SwitcherPro - Software for designing power supplies

Supplied with

Manual including design exercises along with brief theory and simulation results

Analogue Development Kits

Specificaties
Kenmerk Waarde
Classification Education
Technology Analogue
20 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
170,31
(excl. BTW)
206,08
(incl. BTW)
Aantal stuks
Per stuk
1 - 2
170,31 €
3 - 4
161,79 €
5 +
153,62 €
Related Products
Clicker 2 for PIC32MZ is a compact PIC32 ...
Description:
Clicker 2 for PIC32MZ is a compact PIC32 development kit with two mikroBUS™ sockets for click board connectivity. It carries the PIC32MZ 32-bit microcontroller (1 MB Live-Update Flash and 512 KB SRAM) with FPU from Microchip. With a built-in USB-HID ...
7x10 G click can be used for displaying ...
Description:
7x10 G click can be used for displaying letters on a display with 7x5 font resolution. It carries a matrix of 70 green LEDs driven by a pair of 8-bit serial-in, parallel-out shift registers, a Darlington Transistor array and a ...
1-Wire I2C click carries the DS28E17 1-Wire-to-I2C master ...
Description:
1-Wire I2C click carries the DS28E17 1-Wire-to-I2C master bridge from Maxim Integrated. The click runs on a 3.3V power supply. It communicates with the target microcontroller over 1-Wire® protocol, using the following pins on the mikroBUS™ line: AN, PWM, RST. ...
Temp&Hum 8 click is based on a sensor ...
Description:
Temp&Hum 8 click is based on a sensor from the popular SHT family, designed to measure temperature and humidity. This sensor family has already become an industry standard, providing proven reliability and stability while requiring a minimum number of components, ...